Bedienungsanleitung Yamaha EX5 (Seite 186 von 304) (Englisch)

48736

186

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

186

Song Mode

When the cursor is on the Mute or the FxThru line, you

can directly select a track by pressing corresponding

TRACK [1~16] key on the panel (EX5/7 only). You

can directly set the Mute or FxThru to “on” or “off” by

holding the [F1] PTN key and pressing the targeted

TRACK [1~8] key as far as the cursor is on the Mute

or FxThru line.

■ Meas (Measure)

Sets and indicates the Measure and Beat numbers in

the currently selected song.

❏ Settings: 001~999

The sequencer [REW] and [FWD] keys can also be used

for rewinding and fast forwarding, and [TOP] key

returns you to the first measure of the song.

■ Time Signature

Indicates the time signature of a song. Time

signature can be set in the Song Record mode (see

page 193).

■ Click (Metronome) (Click Mode)

Sets the sound mode for the metronome (Click).

There are four modes, “off”(does not sound),

“rec”(sounds during recording), “play”(sounds

during playback and while recording), and

“all”(sounds always). This function is convenient for

playing in time, when performing or recording.

❏ Settings: off, rec, play, all

In the PFX screen (see page 187), the sound and

volume of the metronome (Click) can be set.

■ Click (Metronome) Beat

Sets the beat(note unit) for when the metronome

(Click) will sound.

❏ Settings: 1/4, 1/8, 1/16

Tracks with the

FxThru turned “on”

Tracks 1~16Pt: Pattern Track Fx: Play Effects Track

Tracks with the

Mute turned “on”

■ Loop

Sets the Loop playback to “on” or “off.” The Loop

function will always play in a loop according to the

measures designated as the Start Point and End

Point.

❏ Settings: on, off

■ Loop Start/End Point

Sets the range of the loop (the beginning measure

and end measure for playback). As stated above,

when Loop is set to “on,” the designated range will

play back repeatedly.

❏ Settings: Each Start Point and End Point can be set from

001~999.

If you start the song at a measure before the loop range,

the loop function will begin when the Start Point is

reached. Whereas, if you start the song at a measure

after the loop range, the song will proceed to play back

like any other song, and automatically stop at the end.

■ Tempo

Sets the tempo for the song that is played.

❏ Settings: 30.0~250.0

■ Pattern

Displays the pattern that is set for the measure of the

currently selected song. When a pattern has not been

recorded in the current pattern track, you can select

a pattern that suits the performance for that song.

Recording for the pattern track is explained on page

196, and is accomplished in Song Record mode.

❏ Settings: off, 01~50, end

In Pattern Record mode (page 223), a maximum of 50

types of patterns can be created.

[F7]/[F8]: LOC1/LOC2 (Location 1/2)

The Function keys, [F7] and [F8], can be

designated with appropriate measure (location)

numbers. Later you can recall these locations

regardless of whether the song is being played or

not. Press [F7] and [F8] to recall these location

points.

To set Location 1, press [F7] while holding down

the [SHIFT] key. In the same way, to set Location

2, press [F8] while holding down the [SHIFT] key

at the measure number of the measure that you

want to recall. Press either [F7] or [F8] to recall the

measure (location) set here.

Song/E/qx 5/21/98 11:40 AM Page 186

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha EX5 Seite 186

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha EX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info