Bedienungsanleitung Yamaha F02 (Seite 37 von 52) (Englisch)

599464

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Appendix

F02 Owner’s Manual

Appendix

Message List

Message Meaning

CLr

Initializing the instrument to the default setting.

NOTICE

Do not turn off the power of the instrument when “CLr” appears in the display. Doing so may delete all Song data

in the instrument, including external Songs (page 23).

con

Displayed when application software is started on a computer or other device connected to the instrument.

When this message appears, you cannot operate the instrument.

E01

Displayed when the character code (page 29) is not appropriate for the file name of the Song which you are

selecting. Switch the character code.

Displayed when the data format is not compatible with this instrument, or the data has some other problems.

This Song cannot be selected.

Displayed when no USB flash memory can be found, or a problem has occurred in the USB flash memory.

Disconnect and connect the device again, then execute the operation. If this message appears repeatedly even

when there aren’t any other likely problems, the USB flash memory may be damaged.

Displayed when the backup data cannot be loaded. There is no backup data which can be loaded, or the data

may be damaged.

E02

Indicates that the USB flash memory is protected.

E03

Displayed when the memory of the USB flash memory becomes full, or the number of files and folders exceeds

the system limit.

E04

Displayed when conversion to audio, Audio Song playback or recording has failed. If you are using a USB flash

memory to which data has already been stored or deleted a number of times, first make sure that the device does

not contain important data, then format it by computer and connect to the instrument again.

EEE

A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.

End

Displayed when the current operation is completed.

Enp

The memory of the instrument or the USB flash memory is running out. We recommend that you remove any

unnecessary files (page 27) to ensure sufficient memory capacity.

FCL

Indicates that internal memory is being cleaned up. Panel settings and recorded Songs which have been stored

to internal memory are being cleared, because the power has been turned off before the Save, Load or Convert

operations were completed.

NOTICE

Do not turn off the power of the instrument when “FCL” appears in the display.

FUL

Since the memory of the instrument or the USB flash memory is insufficient, the operation could not be

completed. If this message appears during recording, the performance data may not be recorded properly.

n y

Confirms whether each operation is executed or not.

Reconfirms whether the overwriting or delete operation is executed or not.

Pro

Displayed when you try to write to a protected read-only file in the USB flash memory. Use a read-only file after

cancelling the read-only setting.

StP

Displayed when conversion to audio operation has been cancelled.

UnF

Displayed when an unformatted USB flash memory is connected. First make sure that the device does not

contain important data, then format it by computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha F02 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha F02

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info