Bedienungsanleitung Yamaha GX-707RDS (Seite 31 von 53) (Englisch)

554952

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

E-23

English

Tuning operation

Automatic preset tuning

You can make use of an automatic preset tuning function. With this

function, the built-in tuner performs automatic tuning. Up to 40

stations [8 stations x 5 groups (A, B, C, D and E)] are stored

automatically.

1 Turn on the power.

2 Press INPUT or until “TUNER” (2, 7) appears on the

display, or simply press TUNER on the remote control.

3 Press and hold MEMORY for more than 2 seconds.

* The “MEMORY” (6) and “AUTO” (4) indicators flash.

The tuner performs automatic tuning and searches for FM stations

first and then AM stations. Received stations are programmed

sequentially to A1, A2, A3 and so on.

When the automatic preset tuning is completed;

The display shows the frequencies of the first preset station (stored

to A1).

If you want to check the contents and the number of preset stations,

follow the procedure in the section “To recall a preset station” on

page 24.

To recall a preset station

Simply follow the procedure in the section “To recall a preset

station” on page 24.

Notes

• The automatic preset tuning search will be performed through all

frequencies until 40 stations are stored. If the number of received stations

is less than 40, the search will stop after searching all frequencies.

* Since FM stations are searched for first, there may be a case that 40

preset stations are occupied by FM stations only.

• With this function, only stations with sufficient signal strength are stored

automatically. If the station you want to program is weak in signal

strength, tune in to it with the Manual tuning method (in monaural) and

program it by following the procedure in the section “To store stations”

on page 24.

• You can replace a preset station with another FM or AM station

manually by simply following the procedure in the section “To store

stations” on page 24.

Memory back-up

The memory back-up circuit prevents the programmed data

from being lost even if the AC supply lead is disconnected from

the AC outlet or the power is cut due to temporary power

failure. If, however, the power is cut for more than one week,

the memory may be erased. If so, it can be re-programmed by

simply following the Preset tuning steps.

DISC3DISC2DISC1

Versi

3–DISC VCD CHANGER

STANDBY

TIMER

INPUT

PRESET

TUNING

BAND A

DOWN

PHONES

BASS TREBLE

MODE DOLBY NR

REC

PAUSE

AUTO

MANUAL

TIMER

MEMORY

TIME ADJ

RANDOM

HOUR

POWER

PRESET

TUNER

PRESET

TIME

PROG

R.TIME

EDIT

DISC SKIP

INTRO

MODE

RETURN

SELECT

KARAOKE

TIME INDEX

DIGEST

TIME INDEX

VCD

DIRECTION

LEVEL

REC

PAUSE

TEST

—

PROGRAM

CENTER

REAR

DELAY

KEY

ECHO

MUSIC

SLEEP

INPUT

TAPE

VOLUME

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha GX-707RDS Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info