E-42
Dubbing
•
During dubbing, adjusting the VOLUME control and using
the built-in graphic equalizer and the sound field
processor have no effect on the recorded sound.
•
Try to use the same tape formula and length for the
recording tape as for the master tape.
1 Press the TAPE 1/2 input selector button.
2 Load a prerecorded tape into the deck 1 cassette
compartment. Insert a blank tape into the deck 2 cassette
compartment.
3 Select the reverse mode “ ” to record on only one
side, or “ ” for
continuous recording on both sides by pressing the
reverse MODE selector button.
4 Press the DUBBING button.
* Press “NORMAL” to dub at normal speed, and “HIGH”
to dub at about twice the normal speed.
* Dubbing will begin from side A regardless of the side
now selected.
To stop dubbing
Press the stop button.
* Tape 1 and tape 2 will stop at the same time.
Note
Only tapes originally encoded with Dolby NR will be dubbed
onto tapes with Dolby NR encoding.
Even if the Dolby NR is on, it will have no effect on the
recording of tape 2 during dubbing.
However, the playback tonal quality of tape 1 will change
according to whether the Dolby NR button is on or off.
Erasing recorded tapes
11 Load the tape to be erased into the deck 2 cassette
compartment.
22 Press the INPUT selector or button once or more
and select an input source position of external unit
(MD/AUX, VCR or LD/TV).
* Make sure that there is no sound output from the
selected external unit.
33 Select the reverse mode “ ” to erase only one side or
“ ” to erase both sides
by pressing the reverse MODE selector button.
44 Press the REC/PAUSE button, then press the play
button on the remote control transmitter to erase side A of
the tape, or the play button to erase side B.
OTHER RECORDINGS
