Bedienungsanleitung Yamaha MO6 (Seite 61 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Quick GuideEditing a Program

Editing a Voice

Owner’s Manual

After the Voice has been stored, a “Completed” message

appears and operation returns to the Voice Play display.

Never attempt to turn off the power while an “Executing...” or “Please

keep power on” message is shown. Turning the power off in this state

may cause the system to freeze and prevent normal startup the next

time the power is turned on, as well as resulting in the loss of all user

data.

If you select another Voice without storing, the currently edited Voice

will be lost. Make sure to store the edited Voice before selecting another

Voice.

Saving the edited Voices to a USB

storage device

Connect the USB device and follow the instructions below.

n When a USB storage device is connected or media is inserted, an

error message “USB device unformatted.” may appear in the LCD

display, indicating that the device must be formatted for use in the

File mode (page 211).

If the device is divided into several partitions, select the

speciﬁc partition for use. If the device has several media

(e.g., discs) inserted, select a speciﬁc Slot number.

The following three ﬁle types are available for saving Voice

data. Here, select “All Voice.”

Move the cursor to the ﬁle name ﬁeld, then input the

desired ﬁle name. For detailed instructions on naming a

Voice, refer to page 38.

For information on how to select a folder, see page 213. For

information on how to create/delete a folder and change

the folder name, see page 211.

If you are about to overwrite an existing ﬁle, the display

prompts you for conﬁrmation. Press the [INC/YES] button

to execute the Save operation to overwrite the existing ﬁle,

or press the [DEC/NO] button to cancel it.

While the data is being saved/loaded, make sure to follow these

precautions:

• Do not remove or eject the media from the USB storage device.

• Do not unplug or disconnect the USB storage device.

• Do not turn off the power of the instrument or the relevant devices.

To execute the Store operation, press the

[INC/YES] button.

[FILE] ➞ [F2] SAVE

Press the [FILE] button to enter the File mode.

Then press the [F1] CONFIG button and [SF1]

CURRENT button.

Press the [F2] SAVE button to call up the Save

display.

DEC NO INC YES

EXIT ENTER

EXECUTE

CAUTION

Set the Type parameter to “All Voice.”

All

When this is selected, execute the Save operation to

save all the created data including the User Voices as

a single ﬁle (extension: M7A).

All Voice

When this is selected, execute the Save operation to

save all User Voices as a single ﬁle (extension: W7V).

Voice Editor

When this is selected, execute the Save operation to

save all User Voices as a single ﬁle (extension: W7E)

which can be exported to the Voice Editor software.

Input a file name.

If you have created a destination folder, select

the folder.

Press the [SF1] EXEC button to actually save

the file.

File name

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info