Bedienungsanleitung Yamaha MO6 (Seite 62 von 240) (Englisch)

530340

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Quick Guide Editing a Program

Editing a Voice

Owner’s Manual

■ Loading Voice data from a USB storage device

In the previous section, we saved Voice data as an “All

Voice” ﬁle to a USB storage device. Here, we’ll recall that

Voice data and load it to the instrument with the Load

operation.

If the device is divided into several partitions, select the

speciﬁc partition for use. If the device has several media

(e.g., discs) inserted, select a speciﬁc Slot number.

The ﬁle saved in operation explained on the previous page

has all the User Voices.

If you wish to load all the User Voices, set Type to

“AllVoice.”

If you wish to load only a speciﬁc Voice, set Type to

“Voice.”

Move the cursor to the ﬁle (extension: W7V) saved in the

operation explained on the previous page. If you set the

Type parameter to “AllVoice” in step 3, go to step 5. If the

desired ﬁle was saved in speciﬁc folder, enter the folder

and select the ﬁle. For information on how to select a folder,

see page 213. If you set the Type parameter to “Voice” in

step 3, execute the operations in the following box, then go

to step 5.

After the data has been loaded, a “Completed” message

appears and operation returns to the original display.

While the data is being saved/loaded, make sure to follow these

precautions:

• Do not remove or eject the media from the USB storage device.

• Do not unplug or disconnect the USB storage device.

• Do not turn off the power of the instrument or the relevant devices.

[FILE] ➞ [F3] LOAD

Press the [FILE] button to enter the File mode.

Then press the [F1] CONFIG button and [SF1]

CURRENT button.

Press the [F3] LOAD button to call up the Load

display.

Select the file type to be loaded.

Select the file ( ) to be loaded.

When Type is set to “Voice”:

When Type is set to “Voice,” you can specify and load

a speciﬁc Voice from a ﬁle (with the extension W7V or

M7A).

Loading data to this instrument automatically erases and

replaces any existing data in the User memory.

Press the [SF1] EXEC button to actually load

the file.

ENTER

EXECUTE

Move the cursor to the ﬁle (extension:W7V) saved

in the operation explained on the previous page.

Select a source Voice Bank from the selected ﬁle

with the following operation.

To select a User Normal Voice Bank, press one of

the [USER1] and [USER2] buttons. To select a User

Drum Voice Bank, simultaneously hold the [DRUM

KITS] button and press the [USER1] button.

After selecting a source Voice Bank, all the Voices

contained in the selected Bank are listed in the

display. Move the cursor to the desired Voice to be

loaded.

Select a destination Voice Number.

Select a Voice by moving the cursor to the

location of “USR1” in the above display and

using the data dial.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MO6 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MO6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info