Bedienungsanleitung Yamaha Montage 8 (Seite 71 von 86) (Englisch)

652605

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MONTAGE Owner’s Manual

Troubleshooting



When the Part produces a wrong pitch, is the appropriate tuning system selected from the Micro Tuning parameter?

• In case of Normal Part (AWM2) and Drum Part

• In case of Normal Part (FM-X)

 When the Part produces a wrong pitch, is the LFO Pitch Modulation Depth set too high?

• In case of Normal Part (AWM2)

• In case of Normal Part (FM-X)

 When a Part produces a wrong pitch, are Coarse tune and Fine tune settings appropriate?

• In case of Normal Part (AWM2) and Drum Part

• In case of Normal Part (FM-X)

 When the Part seems to produce the wrong pitch, is the destination of the controller set to “Pitch”?

No effect is applied.

 Is the Effect Switch turned off?

 Is the Variation Send or Reverb Send set to a value other than “0”?

 Is the Variation Return or Reverb Return set to a value other than “0”?

 Have any or all of the Element/Keys’ Insertion Effect Output parameters been set to “thru” in the effect setting?

 In case of System Effect, have any or all of the effect types been set to “No Effect”?

 In case of Insertion Effect, have any or all of the effect types been set to “Thru”?

 Check whether the Insertion Switch parameters are set properly or not.

Cannot start the Arpeggio.

 Check whether the [ARP ON/OFF] button is turned on or off.

 Count the number of Parts whose Arpeggio switches are turned on.

You can play back the Arpeggios of up to eight Parts simultaneously.

 Are the Arpeggio related parameters such as Note Limit and Velocity Limit set appropriately?

 Is the Arpeggio Type parameter set to “off”?

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Part Settings]  [Pitch]  “Micro Tuning Name”

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Pitch/Filter]  [Pitch]  “Micro Tuning Name”

[EDIT]  Part selection  Element selection  [Element LFO]  “Pitch Mod”

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Mod/Control]  [2nd LFO]  “Pitch Modulation”

[EDIT]  Part selection  Element/Key selection  [Osc/Tune]  “Coarse”

[EDIT]  Part selection  Element/Key selection  [Osc/Tune]  “Fine”

[EDIT]  Part selection  Operator selection  [Form/Freq]  “Coarse”

[EDIT]  Part selection  Operator selection  [Form/Freq]  “Fine”

[EDIT]  Part selection  [Mod/Control]  [Control Assign]  “Destination”

[UTILITY]  [Effect Switch]

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]  [Routing]  “Var Send”

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]  [Routing]  “Rev Send”

[EDIT]  PART [COMMON]  [Effect]  [Routing]  “Var Return”

[EDIT]  PART [COMMON]  [Effect]  [Routing]  “Rev Return”

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]  [Routing]  “Element 1-8”

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]  [Ins A]/[Ins B]

[EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Arpeggio]  [Common]

[EDIT]  Part selection  [Arpeggio]  [Individual]  “Name”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha Montage 8 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info