Bedienungsanleitung Yamaha MOTIF ES7 (Seite 85 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Editing a Voice

Owner’s Manual

Plug-in Voice Edit

The Plug-in Voices (available when installing optional Plug-in Boards to the instrument) can be edited in basically the same way

as in Normal Voice Edit (page 79). Unlike with Normal voices, the Plug-in voices only have one Element for editing. In addition,

some of the other parameters may not be available. Refer to page 205 in the Reference section.

Storing/Saving the created Voice

Two steps are necessary in order to store (save) your voice – storing the edited voice to internal memory and saving the stored

voices to a SmartMedia/USB storage device.

Keep in mind that edited Voice data is stored to internal User memory (Flash ROM) and is stored even when turning the power

off. As such it is not necessary to save the data to SmartMedia card or another device; however, you may want to save it to

another media for backup or organizational purposes, using the Save operation. For more information, see page 86.

Storing the edited Voice as a User Voice

to internal memory

Make sure to execute the Store operation before selecting

another Voice.

Select a User Bank (“USR1” or “USR2” when storing a Normal

Voice, “UDR” when storing a Drum Voice, “P1-U” ~ “P3-U”

when storing a Plug-in Voice) and the desired Voice number

by using the data dial, [INC/YES] and [DEC/NO] button.

When you execute the Store operation, the settings for the destination

memory will be overwritten. Important data should always be backed up to

a separate SmartMedia/USB storage device.

The display prompts you for conﬁrmation.

To cancel the Store operation, press the [DEC/NO] button.

User Plug-in Voice 064

User Plug-in Voice 001

User Plug-in Voice 002

User Plug-in Voice 003

User Plug-in Voice 064

User Plug-in Voice 001

User Plug-in Voice 002

User Plug-in Voice 003

Voice Edit

STORE

User Normal Voice 128

User Normal Voice 001 User Drum Voice 001

User Drum Voice 002

User Drum Voice 003

User Drum Voice 32

User Drum Voice Bank

Internal memory (Flash ROM)

User Normal Voice 002

User Normal Voice 003

User Normal Voice Bank 1

User Normal Voice 128

SmartMedia

USB storage

device

User Plug-in Voice 001

User Plug-in Voice 002

User Plug-in Voice 003

User Plug-in Voice 064

User Plug-in Voice Bank 1

File extension: W7A

File extension: W7V

File extension: W7E

SAVE

All the User

Voice data in

internal

memory can

be saved as

a single ﬁle.

The W7E ﬁle can be loaded to the

Voice Editor, computer software.

Storing

edited Voices

individually

[VOICE] → [STORE]

1After editing the Voice, press the [STORE] button

to enter the Voice Store mode.

2Select the destination Voice memory.

Select a User Bank.

Select a Voice number.

3Press the [ENTER] button.

CAUTION

EXIT ENTER

EXECUTE

DEC/NO INC/YES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info