Bedienungsanleitung Yamaha MOTIF ES7 (Seite 87 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Editing a Performance

Owner’s Manual

■ Loading Voice data from the SmartMedia/USB

storage device

In the previous section, we saved Voice data as an “All Voice”

ﬁle to a SmartMedia card or USB storage device. Here, we’ll

recall that Voice data and load it to the instrument with the

Load operation.

Refer to “Basic settings for using SmartMedia or a USB

storage device” on page 30.

The ﬁle saved in operation explained on the previous page

has all the User Voices. If you wish to load all the User Voices,

set Type to “All Voice.” If you wish to load only a speciﬁc

voice, set Type to “Voice.”

Move the cursor to the ﬁle (extension: W7V) saved in the

operation explained on the previous page. If you’ve set the

Type to “AllVoice” in step #3, go to step #5. If you’ve set the

Type to “Voice” in step #3, execute the operations in the

following box, then go to step #5.

When Type is set to “Voice”:

When Type is set to “Voice,” you can specify and load a

speciﬁc Voice from a ﬁle (with the extension W7V or W7A).

If you want to change the source Voice Bank/Number, press

the [EXIT] button to return the display to the ﬁrst one (shown at

the top of this box) then perform the above instructions again.

Loading data to this synthesizer automatically erases and replaces

any existing data in the User memory. Make sure to save any

important data to a SmartMedia/USB storage device before

performing any Load operations.

After the data has been loaded, a “Completed” message

appears and operation returns to the original display.

While the data is being saved, make sure to follow these precautions:

•

Never remove or eject the media from the device (SmartMedia or USB storage).

•Never unplug or disconnect any of the devices.

•Never turn off the power of the MOTIF ES or the relevant devices.

Editing a Performance

The Performance Edit mode ([PERFORM] → [EDIT]) lets you create your own original Performances — containing up to four different

Parts (Voices) — by editing the various parameters. The Voices can be selected from the internal tone generator or the installed Plug-in

Boards. After assigning different Voices to separate ranges of the keyboard, edit the detailed parameters in the Performance Edit mode.

[FILE] → [F3] LOAD

1Press the [FILE] button to enter the File mode,

then execute the basic settings.

2Press the [F3] LOAD button to call up the Load

display.

3 Select the file type to be loaded.

4 Select a file ( ) to be loaded.

5Press the [ENTER] button to execute the Load

operation.

ENTER

EXECUTE

ENTER

EXECUTE

Move the cursor to the ﬁle (extension: W7V) saved

in the operation explained on the previous page.

Select a source Voice Bank from the selected ﬁle with the following operation.

To select a User Normal Voice Bank, press one of the [USER1] and [USER2]

buttons. To select a User Drum Voice Bank, simultaneously hold the [DRUM

KITS] button and press the [USER1] button. To select a User Plug-in Voice

Bank, press one of the [PLG1], [PLG2] and [PLG3] buttons. After selecting a

source Voice Bank, all the Voices contained in the selected Bank are listed in

the display. Move the cursor to the desired Voice to be loaded.

Select a destination Voice Number.

You can also change the destination Voice Bank when loading a Normal

Voice or a Plug-in Voice by moving the cursor to the location of “USR1” in the

above display and using the data dial. When loading Plug-in Voice data,

note that the Plug-in Board for the source Voice Bank should match the one

for the destination Voice Bank. When a source Voice Bank is created for the

PLG150-AN, for example, you should select the Voice Bank for the PLG150-

AN as the destination.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info