Bedienungsanleitung Yamaha MOTIF ES7 (Seite 89 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Editing a Performance

Owner’s Manual

●Effect related parameters ................ Pages 177 and 215

The Effects use DSP (Digital Signal Processing) to alter and

enhance the sound of a Performance. The Common Edit

display lets you edit the Effect related parameters.

●Master EQ related parameters ........ Pages 178 and 214

These parameters let you use the ﬁve-band Master EQ to

process the overall sound of the Performance. Master EQ

also features separate EQ shape parameters for the Low and

High bands, as well as the Frequency, Gain and Q controls for

each band.

●Controller related parameters........... Pages 155 and 214

For each Performance, you can assign the Control Change

Number to built-in controllers such as Ribbon Controller,

Knobs (ASSIGN1 and 2), and optionally connected

controllers, such as Foot Controller and Breath Controller.

nFunctions assigned to Controllers depend on the settings of each

Part’s Voice edited in the Voice Edit mode.

●Arpeggio related parameters............. Pages 169 and 214

For each Performance, you can set the Arpeggio related

parameters, such as Arpeggio type and playback tempo.

These can be edited in the Common Edit display.

Enter a name for the Performance from the NAME display

([COMMON] → [F1] GENERAL → [SF1] NAME).

For detailed instructions on naming, refer to page 53 in the

Basic Operation section.

The edited Performance can be stored in the Performance

Store mode. See page 91 for details.

Keep in mind that edited Performance data is stored to

internal User memory (Flash ROM) and is stored even when

turning the power off. As such it is not necessary to save the

data to SmartMedia card or another device; however, you

may want to save it to another media for backup or

organizational purposes. For more information, see page 91.

Compare Function

Just as in the Voice Edit mode, you can use the Compare function also in the Performance Edit mode. This convenient

function lets you switch between the edited voice and its original, unedited condition – allowing you to listen to the

difference between the two and better hear how your edits affect the sound.

1In the Performance Edit mode (with the [EDIT] indicator lit), press the [EDIT] button so that its indicator ﬂashes.

The [C] indicator is shown at the top of the display (in place of the [E] indicator), and the original, unedited Performance

is restored for monitoring.

2Press the [EDIT] button again to disable the “Compare” function and restore the settings for your edited

Performance.

Compare the edited sound with the unedited sound as desired by repeating steps #1 and 2.

nWhile Compare is active, you cannot make edits to the Performance.

[COMMON] → [F6] EFFECT

[COMMON] → [F2] OUT/MEF → [SF3] MEF (Master Effect)

[COMMON] → [F4] CTL ASN (Controller Assign)

5Repeat steps #3 - 4 as desired.

6Name the edited Performance.

7Store the edited Performance to internal User

memory (page 186).

8If desired, save the edited and stored

Performances to a SmartMedia/USB storage

device.

Enter the desired Performance name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info