Bedienungsanleitung Yamaha MOTIF ES7 (Seite 90 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Editing a Performance

90 Owner’s Manual

Editing a Performance by using the Knobs

The four knobs at the top left of the instrument are not only for tweaking the sound while you perform — you can also use

them to edit a Performance, either in the Performance Play mode or the Performance Edit mode.

●When the [PAN/SEND] indicator is turned on:

●When the [TONE] indicator is turned on:

nThe settings above are applied as offsets to the AEG and FEG settings in the Performance Edit mode.

●When the [ARP FX] indicator is turned on:

●When the [EQ] indicator is turned on:

nThe settings above are applied as offsets to the EQ settings in the [PERFORM] → Performance selection → [EDIT] → [COMMON] → [F2] OUT/MEF

→ [SF2] MEQ (Master EQ) display.

●When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):

nIn addition to above functions, Master Effect related parameters (set in the [PERFORM] → Performance selection → [COMMON] → [F2] OUT/MEF

→ [SF3] MEF display) can be assigned to these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular parameters

are assigned to the four knobs can be set in the [UTILITY] → [F4] CTL ASN → [SF5] MEF display.

PAN Determines the stereo pan position of the Performance. [PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F2] OUT/MEF → [SF1] OUT → Pan

Page 213

REVERB Determines the amount of Reverb effect that is applied to the

Performance.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F2] OUT/MEF → [SF1] OUT → RevSend

Page 213

CHORUS Determines the amount of Chorus effect that is applied to the

Performance.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F2] OUT/MEF → [SF1] OUT → ChoSend

Page 213

TEMPO Determines the tempo of the Arpeggio assigned to the currently selected

Performance.

[PERFORM] → Performance selection → [F6] ARP → Tempo Page 213

CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance. [PERFORM] → Performance selection → [F5] EG → CUTOF Page 213

RESONANCE Boosts or attenuates the level at the area around the Filter cutoff

frequency.

[PERFORM] → Performance selection → [F5] EG → RESO Page 213

ATTACK Determines the attack time of the sound. For example, you can adjust a

strings Voice so that the sound gradually swells in volume by setting a

slow attack time – simply turn this knob to the right.

[PERFORM] → Performance selection → [F5] EG → ATK (AEG) Page 213

RELEASE

Determines the release time of the sound. Turning the knob to the right sets a

long release time and (depending on the Voice assigned to the selected

Performance) lets the sound sustain after the key is released. To produce a

sharp release, in which the sound abruptly cuts off, set a short release time.

[PERFORM] → Performance selection → [F5] EG → REL (AEG) Page 213

SWING Adjusts the swing feel of the Arpeggio playback. [PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F3] ARP → [SF3] PLAY FX → Swing

Page 214

GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes. [PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F3] ARP → [SF3] PLAY FX → GateTimeRate

Page 214

VELOCITY Adjusts the velocity of the Arpeggio notes. [PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F3] ARP → [SF3] PLAY FX → VelocityRate

Page 214

UNITMULTIPLY

Adjusts the Arpeggio playback time based on tempo.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F3] ARP → [SF3] PLAY FX → UnitMultiply

Page 214

LO Determines the amount of boost or attenuation applied to the low

frequency band of the Master EQ.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F1] GENERAL → [SF3] MEQ OFS → LOW

Page 213

LO MID Determines the amount of boost or attenuation applied to the low-

midrange frequency band of the Master EQ.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F1] GENERAL → [SF3] MEQ OFS → LOW MID

Page 213

HI MID Determines the amount of boost or attenuation applied to the high-

midrange frequency band of the Master EQ.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F1] GENERAL → [SF3] MEQ OFS → HIGH MID

Page 213

HI Determines the amount of boost or attenuation applied to the high

frequency band of the Master EQ.

[PERFORM] → Performance selection → [EDIT] → [COMMON]

→ [F1] GENERAL → [SF3] MEQ OFS → HIGH

Page 213

ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY] → [F4] CTL ASN → [SF2] ASSIGN display. Page 263

ASSIGN B

ASSIGN 1 Depends on the settings of the Voice assigned to the selected Performance. Page 192

ASSIGN 2

TIP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info