Bedienungsanleitung Yamaha MOTIF ES7 (Seite 92 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Editing a Performance

92 Owner’s Manual

Quick Guide — Advanced Course

After the Performance has been stored, a “Completed” message

appears and operation returns to the Performance Play display.

Keep in mind that the Store operation may take a short time to complete,

during which an “Executing..” or “Please keep power on” message may be

shown. Never attempt to turn off the power while data is being written to

Flash ROM while such a message is displayed. Turning the power off in this

state results in loss of all user data and may cause the system to freeze (due

to corruption of data in the Flash ROM). This may also result in the MOTIF ES

being unable to properly start up the next time the power is turned on.

If you select another Performance without storing, the currently edited

Performance will be lost. Make sure to store the edited Performance before

selecting another Performance.

Saving the edited Performances to a

SmartMedia/USB storage device

Whether you are saving data to SmartMedia or a USB storage

device, the procedure is the same. Insert a SmartMedia card

(to the CARD slot) or connect the USB device and follow the

instructions below.

Refer to “Basic settings for using SmartMedia or a USB

storage device” on page 30.

Move the cursor to TYPE, then select a ﬁle type by using the

data dial, [INC/YES] and [DEC/NO] buttons. When Type is set

to “All,” execute the Save operation to save all the created

data, including the Performances as well as the Voices

assigned to them, as a single ﬁle (extension: W7A).

Move the cursor to the ﬁle name input location, then input a

ﬁle name. For detailed instructions on naming, refer to page

53 in the Basic Operation section.

If you are about to overwrite an existing ﬁle, the display

prompts you for conﬁrmation. Press the [INC/YES] button to

execute the Save operation to overwrite the existing ﬁle, or

press the [DEC/NO] button to cancel it.

While the data is being saved, make sure to follow these precautions:

•Never remove or eject the media from the device (SmartMedia or USB

storage).

•Never unplug or disconnect any of the devices.

•Never turn off the power of the MOTIF ES or the relevant devices.

■ Loading the Performance data from the

SmartMedia/USB storage device

In the previous section, we saved Performance data as an

“All” ﬁle (extension: W7A) to a SmartMedia card or USB

storage device. Here, we’ll recall that Performance data and

load it to the instrument with the Load operation.

Refer to “Basic settings for using SmartMedia or a USB

storage device” on page 30.

4Press the [INC/YES] button to execute the Store

operation.

[FILE] → [F2] SAVE

1Press the [FILE] button to enter the File mode,

then execute the basic settings.

2Press the [F2] SAVE button to call up the Save

display.

3Set the Type parameter to “All.”

EXIT ENTER

EXECUTE

DEC/NO INC/YES

CAUTION

4Input a file name.

5Press the [ENTER] button to execute the Save

operation.

[FILE] → [F3] LOAD

1Press the [FILE] button to enter the File mode,

then execute the basic settings.

2Press the [F3] LOAD button to call up the Load

display.

File name

EXIT ENTER

EXECUTE

DEC/NO INC/YES

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info