Bedienungsanleitung Yamaha MOTIF ES7 (Seite 91 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Editing a Performance

Owner’s Manual

Editing a Performance by using the Con-

trol Sliders (CS)

In the Performance mode, the four Control Sliders let you

independently adjust the levels of the Parts (Voices), letting you

control the overall balance of the Parts.

nInadvertent use of the sliders may result in no sound. If this

occurs, move the sliders upward.

Edit Recall

If you are editing a Performance and select a different

Performance without storing the one you were editing, all the edits

you’ve made will be erased. If this happens, you can use Edit

Recall to restore the Performance with your latest edits intact.

1Press the [JOB] button in the Performance mode to

enter the Performance Job mode.

Press the [F2] RECALL button to call up the Recall display.

3Press the [ENTER] button. (The display prompts you

for conﬁrmation.)

If you wish to cancel the operation, press the [DEC/NO]

button.

Press the [INC/YES] button to execute the Edit Recall

to restore the Performance.

Storing/Saving the created Performance

Two steps are necessary in order to store (save) your Performance – storing the edited Performance to internal memory and saving the stored

Performances to a SmartMedia/USB storage device.

Keep in mind that edited Performance data is stored to internal User memory (Flash ROM) and is stored even when turning the power off. As

such it is not necessary to save the data to SmartMedia card or another device; however, you may want to save it to another media for backup or

organizational purposes, using the Save operation.

Storing the edited Performance as a User Performance to internal memory

Make sure to execute the Store operation before selecting another

Performance.

Select a Performance number by using the data dial, [INC/YES] and

[DEC/NO] button.

When you execute the Store operation, the settings for the destination

memory will be overwritten. Important data should always be backed up to

a separate SmartMedia/USB storage device.

The display prompts you for conﬁrmation.

To cancel the Store operation, press the [DEC/NO] button.

[PERFORM] →→

→→ Performance selection →→

→→ [EDIT] →→

→→

Part selection →→

→→ [F2] OUTPUT →→

→→ [SF1] VOL/PAN

→→

→→ Volume

TIP

Performance Edit

STORE SAVE USB storage

device

SmartMedia

Performance 001

Performance 002

Performance 003

Performance 128

Internal memory

(Flash ROM)

Storing edited

Performances individually

All the User

Performance data in

internal memory can

be saved as a single

ﬁle. File extension: W7A

[PERFORM] → [STORE]

After editing the Performance, press the [STORE]

button to enter the Performance Store mode.

2Select the destination Performance memory.

3Press the [ENTER] button.

CAUTION

EXIT ENTER

EXECUTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info