Bedienungsanleitung Yamaha MOTIF ES7 (Seite 97 von 300) (Englisch)

571272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Creating a Voice by using the Sampling function

Owner’s Manual

Assign the Samples obtained via the Sampling function to speciﬁc Key Ranges to create a Waveform. Because the Waveform data

including Samples which resides temporarily in DIMM (page 187) is lost when the power is turned off, you should always save the

Waveform data or Samples to a SmartMedia/USB storage device before turning off the power. The following four methods can be used to

save a Sample that is assigned to a Waveform. Execute the Save operation in the File mode.

While the data is being saved, make sure to follow these precautions:

•Never remove or eject the media from the device (SmartMedia or USB storage).

•Never unplug or disconnect any of the devices.

•Never turn off the power of the MOTIF ES or the relevant devices.

●Saving as a User Voice

When you save a User Voice that contains Samples, all the

related data — the Waveform assigned to the Voice, the

Samples assigned to the Waveform, as well as the User Voice

itself — is automatically saved together. Insert a SmartMedia

into the CARD slot or connecting the USB storage device to

this synthesizer, and follow the instructions below.

1Press the [FILE] button to enter the File mode, then

execute the basic settings.

Refer to “Basic settings for using SmartMedia or a USB

storage device” on page 30.

2Press the [F2] SAVE button to call up the Save display.

3Set the TYPE parameter to “All” or “AllVoice.”

When “All” is selected, execute the Save operation to save

all the created data including the User Voices as a single

ﬁle. When “AllVoice” is selected, execute the Save

operation to save all User Voices, including Waveforms

assigned to Normal Voice Elements or Drum Voice Keys, as

a single ﬁle.

4Input a ﬁle name.

Move the cursor to the ﬁle name input location, then input a

ﬁle name. For detailed instructions on naming, refer to page

53 in the Basic Operation section.

5Press the [ENTER] button to execute the Save

operation.

If you are about to overwrite an existing ﬁle, the display

prompts you for conﬁrmation. Press the [INC/YES] button to

execute the Save operation to overwrite the existing ﬁle, or

press the [DEC/NO] button to cancel it.

●Saving as a Waveform

When you save a Waveform that makes up a Voice, all the

Samples that are assigned to the Waveform are automatically

saved together. The procedure for saving is the same as

described in “Saving a User Voice” above, with the exception

that Type is set to “AllWaveform” in step #3.

●Saving as a WAV ﬁle

You can select a speciﬁc Sample from a Waveform and save it

as a WAV ﬁle (Windows audio format). Insert a SmartMedia into

the CARD slot or connecting the USB storage device to this

synthesizer, and follow the instructions below.

1Select a Voice containing the Sample to be saved in the

Voice Play mode, then press the [FILE] button to enter

the File mode, and execute the basic settings.

Refer to “Basic settings for using SmartMedia or a USB

storage device” on page 30.

Set the TYPE parameter to “Wav” in the [F2] SAVE display.

3Input a ﬁle name.

Move the cursor to the ﬁle name input location, then input a ﬁle

name. For detailed instructions on naming, refer to page 53 in

the Basic Operation section.

4Press the [ENTER] button, then select a Sample to be saved.

When a Normal Voice is selected in step #1:

Specify the Element and Key Bank to call up the Sample

assigned to the selected Voice. You can hear the Sample by

pressing the [SF1] AUDITION button. Go through the Samples

in this way to ﬁnd the desired Sample.

When a Drum Voice is selected in step #1:

Specify the Note and Key Bank to call up the Sample assigned

to the selected Drum Voice. You can hear the Sample by

pressing the [SF1] AUDITION button. Go through the Samples

in this way to ﬁnd the desired Sample.

5Press the [ENTER] button to execute the Save operation.

If you are about to overwrite an existing ﬁle, the display prompts

you for conﬁrmation. Press the [INC/YES] button to execute the

Save operation and overwrite the existing ﬁle, or press the

[DEC/NO] button to cancel it.

●Saving as a AIFF ﬁle

You can select a speciﬁc Sample from a Waveform and save it as a

AIFF ﬁle (Macintosh audio format). The procedure for saving is the

same as described in “Saving as a WAV ﬁle” above with the

exception that Type is set to “AIFF” in step #2.

Saving a Sample [FILE] → [F2] SAVE

CAUTION

This is available only when the cursor is located at

the KeyBank. Each press of the [SF2] button calls up

a different Key Bank assigned to a speciﬁc velocity

range (for the same key).

You can hear the selected sample by

pressing the [SF1] button. (Audition function)

You can hear the selected sample by pressing

the [SF1] button. (Audition function)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info