Bedienungsanleitung Yamaha MOTIF ES7 (Seite 126 von 300) (Englisch)

571272

126

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Creating a Song on the MOTIF ES

126 Owner’s Manual

Quick Guide — Advanced Course

Since the Song can be played back from within the Song Edit

mode, you can instantly hear and check the changes you’ve

made while editing. If you want to hear just the track being

edited, use the Solo function (page 58).

■ Transforming the recorded data and other

operations — Song Job mode

The Song Job mode has a wide variety of operations for

changing and working with Song data. Virtually all of the Jobs

share the same procedure, so we’ll explain only one of them

here — Quantize, which lets you clean up the timing of a

previously recorded track.

In the following example, this musical passage has been

written with exact quarter-note and eighth-note values.

Even though you think you may have recorded the passage

accurately, your actual performance may be slightly ahead of

or behind the beat (or both!). Quantize allows you to align all

the notes in a track so that the timing is absolutely accurate to

the speciﬁed note value.

As shown below, the Jobs are divided into six main groups,

each of which is selected using the [F1] - [F6] buttons.

After specifying the track and range over which the Job is to

be applied, set Quantize to “ ” (8th note) according to the

notation example above. Set the Strength to “100%,”

SwingRate to “050%,” and GateTime to “100%.” Regarding

these parameters, see page 227.

nSet the Quantize value to correspond to the smallest value notes in the

track you are working with. For example, if the data was recorded with

both quarter notes and eighth notes, use eighth note for the quantize

value.

After the Job has been completed, a “Completed” message

appears and operation returns to the original display.

An “Executing...” message is shown when it takes a short amount of time to

execute the Job. Never attempt to turn off the power while the Job is being

executed. Turning the power off in this state results in loss of all user data.

If you are satisﬁed with the result of the Job, go to step #7.

If not, execute the UNDO Job in the [F1] UNDO display in the

Song Job mode to restore the data to its previous state, then

try out the Job (from step #4) again. For details about Undo,

see next page.

In addition to Quantize, you’ll ﬁnd a variety of other useful and

powerful Jobs in the Song Job mode (page 226) and Pattern

Job mode (page 244).

5Press the [F] (Play) button to hear your edited

data.

6Edit other tracks as required by repeating steps

#3 through #5 as desired.

7After editing, press the [SONG] button to return

to the Song Play mode.

8Save the edited Song data to a SmartMedia/USB

storage device (page 132) before turning the

power off.

1Press the [SONG] button to enter the Song Play

mode, then select a Song for which the Job is to

be applied.

Press the [JOB] button to enter the Song Job mode.

[F1] [F2] [F3] [F4] [F5] [F6]

Indicates the Job List. Because all the Jobs cannot be

displayed simultaneously, you will need to use the cursor

buttons to scroll the display in order to ﬁnd the desired Job.

[F1] UNDO Undo (Canceling the executed Job)/Redo

(Restoring the executed Job) functions

[F2] NOTE Note Data Job

[F3] EVENT Event Job

[F4] MEAS Measure Job

[F5] TRACK Track Job

[F6] SONG Song Job

3Press the [F2] NOTE button, move the cursor to

“01: Quantize” then press the [ENTER] button to

call up the Quantize Job display.

4Set the relevant Job parameters.

5Press the [ENTER] button to execute the Job.

6Press the [SONG] button to return to the Song

Play mode, then press the [F] button to hear

the song over which the Job is applied.

7Save the Song data to a SmartMedia/USB

storage device in the File mode (page 132) before

turning the power off.

Track over which the Job is applied Range over which the Job is applied

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info