Bedienungsanleitung Yamaha MOTIF ES7 (Seite 127 von 300) (Englisch)

571272

127

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Creating a Song on the MOTIF ES

127

Owner’s Manual

Quick Guide — Advanced Course

Using the Undo/Redo functions

If you’re not satisﬁed with the results of a just-executed Job, or you want to hear the difference of the sound before and

after using a Job, you can use the convenient Undo and Redo functions. After changing the data with a particular Job,

repeat steps #1 -4 as desired.

1Press the [SONG] button to return to the Song Play mode, then press the [F] button to hear the Song as it was

changed by the Job.

This lets you check the results of the Job.

2After stopping the song, press the [JOB] button followed by the [F1] UNDO button to call up the Undo display.

Press the [ENTER] button to execute Undo.

The Song data is restored to its previous state.

3Press the [SONG] button to return to the Song Play mode, then press the [FF

FF] (Play) button to play the song.

This lets you check the sound before actually making changes to it with the Job.

4After stopping the song, press the [JOB] button followed by the [F1] UNDO button to call up the Undo display.

Press the [ENTER] button to execute the Redo.

This lets you “redo” the Job, restoring the Song to the changes you made before using Undo in step #2 above.

nUndo/Redo is applied to the most recent operation (Job, Edit, Record, etc.).

nThe Undo/Redo Job is available also in the Pattern Job mode.

Editing Mixing parameters to complete a Song (in the Mixing mode/Mixing Edit mode)

In this ﬁnal step (other than saving your precious work, which we’ll cover next), you can mix down your tracks with the Song

Mixing function – adjusting the volume balance and pan setting of all the parts and tweaking the effect levels.

nThe explanations here also apply to the Pattern mode.

Select the menu you wish to edit by pressing the [F1] - [F4] buttons, then edit the parameters in each display.

You can use the Song Mixing mode for Sample Mixing as well. For information on the available parameters, see page 233.

If you wish to edit more detailed Mixing parameters, enter the Song Mixing Edit mode.

Press the [SONG] button to enter the Song Play mode, then select a Song for which Mixing edits have been made.

2Enter the Song Mixing mode by pressing the [MIXING] button (the lamp lights).

TIP

Indicates the operation to be affected by Undo. Changes to “Redo.”

[ENTER]

button

Indicates the operation to be affected by Redo. Changes to “Undo.”

[ENTER]

button

If you alter any parameters, the [E] indicator will appear in the top left of the display.

Press the [F6] button to switch between the display for

Parts 01-16 (for the internal tone generator), 17-32 (for

the Multi-Part Plug-in Board PLG100-XG), and PLG1-3

(for the Single Part Plug-in Board).

Press the [F5] VCE ED button to enter the Mixing

Voice Edit mode (page 105).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info