Bedienungsanleitung Yamaha MOTIF ES7 (Seite 137 von 300) (Englisch)

571272

137

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Quick Guide — Advanced Course

Using as a Master Keyboard

137

Owner’s Manual

Memorize to a Master

Input a name in the [EDIT] → [COMMON] → [F1] NAME

display.

For detailed instructions on naming, refer to page 53 in the

Basic Operation section.

Press the [STORE] button to enter the Master Store mode.

2Select the destination Master by using the data dial,

[INC/YES] and [DEC/NO] button.

When you execute the Store operation, the settings for the destination

memory will be overwritten. Important data should always be backed up

to a separate SmartMedia/USB storage device.

3Press the [ENTER] button. (The display prompts you for

conﬁrmation.)

To cancel the Store operation, press the [DEC/NO] button.

4Press the [INC/YES] button to execute the Store

operation.

Keep in mind that the Store operation may take a short time to

complete, during which an “Executing..” or “Please keep power on”

message may be shown. Never attempt to turn off the power while data

is being written to Flash ROM while such a message is displayed.

Turning the power off in this state results in loss of all user data and

may cause the system to freeze (due to corruption of data in the Flash

ROM). This may also result in the MOTIF ES being unable to properly

start up the next time the power is turned on.

If you select another Master without storing, the currently edited Master

will be lost. Make sure to store the edited Master before selecting

another Master.

For details, see page 132. Set the ﬁle type to “All.”

Using Zones (keyboard area)

In the Master mode, you can divide the keyboard into (up to) four independent areas (called “Zones”). To each Zone can be

assigned different MIDI channels and different functions of the Knobs and Control Sliders. This makes it possible to control

several parts of the multi-timbral tone generator simultaneously by a single keyboard or to control voices of an external MIDI

instrument over several different channels in addition to the internal voices of this synthesizer itself — letting you use the MOTIF

ES to effectively do the work of several keyboards. You can set the parameters related to the four Zones in the Master Edit mode

and store the settings as a User Master.

1Select a Master to be created.

2Press the [F2] MEMORY button to call up the

Mode setting display.

3Set the Mode, Program number and Zone Switch

on/off (page 138) which you wish to memorize to

the Master.

When the Mode is set to Voice Select a Voice bank and number.

When the Mode is set to Performance Select a Performance bank and number.

When the Mode is set to Song Select a Song number.

When the Mode is set to Pattern Select a Pattern number.

4Name the edited Master.

Determine the mode that is called up

when the Master number is selected.

Set the Zone Switch (below) to

on or off.

Determine the Program number that is

called up when the Master is selected.

Input a Master name.

5Store the edited Master to internal User memory.

6As necessary, save the edited and stored

Masters to a SmartMedia/USB storage device.

CAUTION

1Select a Master to be created.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 137

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info