571272
176
Zoom out
Zoom in
Vorherige Seite
1/300
Nächste Seite
Basic Structure
Internal Structure (System Overview)
176 Owner’s Manual
Sample playback types
Samples can be set to play back in the following three
different ways.
One Shot
When you press a note on the keyboard, the Sample plays
from beginning to end just once. This type of playback is
commonly used for drum and percussion sounds.
Loop
This is used primarily to create long continuous sounds, such
as brass and strings, or instruments with naturally long decay,
such as piano. An appropriate part of the sample near the
end is looped to reproduce a long sustain or decay.
When you play a note on the keyboard, the Sample plays from
the start point to the end point. It then returns to the loop start
point and plays to the end point again, and keeps doing this
until you release the note. With musical instruments in
general, the characteristic part of the sound (the “attack”
section) is usually at the beginning, just after the start point.
After this, the sound does not vary a great deal while the note
is being held, and you can set the loop and end points at
either end of this section. When playing back a Sample of an
instrument that has been looped like this, the attack section of
the sound is played back once and then the looped section is
played back continuously until you release the note. Looping
is also way of creating usable instrument sounds without
using up too much memory.
You can set each point in the Sampling mode. Since this
synthesizer is capable of displaying the entire image of the
sampled audio data in the LCD (zoom in and zoom out are
available), you can edit the loop points visually – making
sample editing accurate and easy.
Reverse
When you press a note on the keyboard, the Sample plays
from end to beginning just once. This is useful for creating
reversed cymbal sounds and other special effects.
[INTEGRATED SAMPLING] [EDIT] [F3] PARAM
PlayMode
[INTEGRATED SAMPLING] [EDIT] [F3] PARAM
PlayMode = oneshot
[INTEGRATED SAMPLING] [EDIT] [F3] PARAM
PlayMode = loop
Start Point
Key on End Point
[INTEGRATED SAMPLING] [EDIT] [F3] PARAM
PlayMode = reverse
Start Point End Point
Sample Wave Loop Playback
Top Point
Start Point End Point
176

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MOTIF ES7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installationsanweisung - Deutsch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Deutsch - 300 seiten

Yamaha MOTIF ES7 Installationsanweisung - Englisch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Holländisch - 300 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Französisch - 300 seiten

Yamaha MOTIF ES7 Installationsanweisung - Französisch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Italienisch - 308 seiten

Yamaha MOTIF ES7 Installationsanweisung - Italienisch - 12 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Portugiesisch - 300 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Spanisch - 297 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info