Bedienungsanleitung Yamaha MOTIF ES7 (Seite 177 von 300) (Englisch)

571272

177

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Internal Structure (System Overview)

177

Owner’s Manual

Basic Structure

Effect Block

This block applies effects to the output of the tone generator

block, processing and enhancing the sound using

sophisticated DSP (digital signal processing) technology.

Effect structure

The effect processing of this synthesizer features the System

Effects, Insertion Effects, Master Effect, Part EQ (Equalizer),

and Master EQ (Equalizer).

■ System Effects (Reverb, Chorus)

System Effects are applied to the overall sound, whether it be

a Voice, an entire Performance, a Song, etc.

With System effects, the sound of each Part is sent to the

effect according to the effect Send Level for each Part. The

processed sound (referred to as “wet”) is sent back to the

mixer, according to the Return Level, and output – after being

mixed with the unprocessed “dry” sound. This arrangement

lets you prepare an optimum balance of the effect sound and

the original sound of the Parts.

Reverb

The Reverb effects add a warm ambience to the sound,

simulating the complex reﬂections of actual performance

spaces, such as a concert hall or a small club. A total of 20

different Reverb types are available.

Chorus

The Chorus effects use various types of modulation

processing, including ﬂanger and phaser, to enhance the

sound in a variety of ways. A total of 49 types are available,

including reverb and delay effects.

nAbout the System Effect related display in each mode, see pages 179

and 180.

■ Insertion Effects A, B

Insertion effects can be applied individually to each part.

Insertion effects are mainly used to directly process a single

part. The depth of the effect is adjusted by setting the dry/wet

balance. Since an Insertion effect can only be applied to one

particular part, it should be used for sounds you want to

drastically change or for sounds that use an effect unintended

for other sounds. You can also set the balance so that only the

effect sound is heard, by setting Wet to 100%.

This synthesizer features eight sets of Insertion effects (one

set has A and B units). They can be applied to all parts of the

Performance, and applied to eight parts (maximum) of the

Song/Pattern.

A total of 116 different Chorus types are available.

nIn the Voice mode, only one set of the Insertion effects is available.

nFor details on the displays related to the Insertion effects in each

mode, see pages 179 and 180.

nAmong the AUDIO IN parts, Insertion effects cannot be applied to the

mLAN parts and AIEB2 parts.

■ Plug-in Insertion Effects

This is a special effect system, only available when an effect-

type Plug-in Board is installed. Plug-in Board effects are not

available in the Voice mode.

nFor details on the displays related to the Plug-in Insertion effects in

each mode, see pages 179 and 180.

■ Master Effect

This block applies effects to the ﬁnal stereo output signal of

the entire sound. A total of 8 different Master Effect types are

available.

nFor details on the displays related to the Master effects in each mode,

see pages 179 and 180.

EFFECT Buttons

Three EFFECT buttons on the panel let you switch each

effect block on and off.

Press the [INSERTION] button below “BYPASS” so that

the lamp lights to turn the Insertion effects off. You can

specify which Insertion effects (only the internal

Insertion effect, only the Plug-in Insertion effect, or both

of them) are bypassed from the [UTILITY] → [F1]

GENERAL → [SF3] EF BYPS display in the Utility mode.

Press the [SYSTEM] button below “BYPASS” so that the

lamp lights to turn the System effects off. You can

specify which System effects (only the Reverb effect,

only the Chorus effect, or both of them) are bypassed

from the [UTILITY] → [F1] GENERAL → [SF3] EF BYPS

display in the Utility mode.

Press the [MASTER EFFECT] button so that the lamp

lights to turn the Master effect on. Keep in mind that

pressing and holding this button calls up the Master

effect setup display in the current mode.

Controlling the Master effect by using the Knobs

When pressing the [ARP FX] button and the [EQ] button

simultaneously (both lamps light), you can control the

Knobs to adjust the Master effect related parameters

speciﬁed in the [UTILITY] → [F4] CTL ASN → [SF5]

MEF display of the Utility mode.

BYPASS

INSERTION SYSTEM MASTER

EFFECT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 177

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info