Bedienungsanleitung Yamaha MOTIF ES7 (Seite 179 von 300) (Englisch)

571272

179

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Basic Structure

Internal Structure (System Overview)

179

Owner’s Manual

Effect connection in each mode

● In the Voice mode

The Effect parameters in the Voice mode are set for each Voice and the settings are stored to internal ﬂash ROM as a User Voice.

Please note that the Master Effect and Master EQ parameters are set for all the Voices in the Utility mode and stored to internal

ﬂash ROM as System settings by pressing the [STORE] button also in the Utility mode.

nThe parallel connection is not available for Plug-in voices.

nThe Plug-in Insertion effect (when the Effect Plug-in board has been installed) is not available in the Voice mode.

● In the Performance mode

The Effect parameters in the Performance mode are set for each Performance and the settings are stored to internal ﬂash ROM

as User data.

[VOICE] → Voice selection → [EDIT] → [COMMON]

→ [F6] EFFECT → [SF1] CONNECT

[VOICE] → [UTILITY] → [F3] VOICE → [SF2] MEF

(for all Voices)

[VOICE] → [UTILITY] → [F3] VOICE →

[SF1] MEQ (for all Voices)

[VOICE] → Voice selection → [EDIT] →

[COMMON] → [F1] GENERAL → [SF3]

MEQ OFS

You can set which Insertion system, A or B,

is applied to each Element (or to each key

when the Drum voice is selected). The

Insertion effect can also be bypassed.

Tone Generator block

Element or Key

Element EQ

Reverb (REV), Chorus (CHO)

Send Level Return Level

You can select the Insertion connection

from the three types shown below.

Insertion Effect

System Effect

Master Effect Master EQ Output

A to B

B to A

parallel

[PERFORM] → Performance selection → [EDIT] →

[COMMON] → [F6] EFFECT → [SF1] CONNECT

The Insertion connection type

depends on the setting of the Voice

assigned to the selected part.

[PERFORM] → Performance selection → [EDIT] → Part selection → [F3] EQ

[PERFORM] → Performance selection → [EDIT] →

[COMMON] → [F2] OUT/MEF → [SF1] OUT

Select the part to which the Plug-in Insertion effect is applied from Parts 1-4,

Plug-in Parts 1-3, and the audio input Part in the following display.

[PERFORM] → Performance selection → [EDIT] → [COMMON] → [F6]

EFFECT → [SF1] INS SW

Among all of the audio input Parts, the Insertion effect can be applied

only to the A/D Input Part.

[PERFORM] → Performance selection → [EDIT] →

[COMMON] → [F2] OUT/MEF → [SF2] MEQ

[PERFORM] → Performance selection → [EDIT] →

[COMMON] → [F1] GENERAL → [SF3] MEQ OFS

Part 1

Part EQ

Insertion Effect

(VCE INS)

Audio Input part

Plug-in Insertion Effect

(PLG-EF)

When the PLG100-VH

has been installed

Tone Generator

block

Part 1

[PERFORM] → Performance selection → [EDIT] →

[COMMON] → [F2] OUT/MEF → [SF3] MEF

Master Effect Master EQ Output

Send Level Return Level

Reverb (REV), Chorus (CHO)

System Effect

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 179

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info