571272
187
Zoom out
Zoom in
Vorherige Seite
1/300
Nächste Seite
Basic Structure
Internal Memory and File Management
187
Owner’s Manual
Internal Memory
Below are explanations of the basic terms used in the Memory Structure illustration on the previous page.
Flash ROM
ROM (Read Only Memory) is memory designed specifically for reading out of data, and as such data cannot be written to it.
Unlike conventional ROM, Flash ROM can be overwritten – allowing you to store your own original data. The contents of Flash
ROM are maintained even when the power is turned off.
DRAM
RAM (Random Access Memory) is memory designed specifically for data writing and data reading operations. There are two
different kinds of RAM, depending on the condition for storing the data: SRAM (Static RAM) and DRAM (Dynamic RAM).
The created data stored on DRAM is lost when the power is turned off. Because of this, you should always store any data
residing in DRAM to the SmartMedia/USB storage device before turning off the power.
DIMM
DIMM modules must be installed in order to use the Sampling function or to load audio data (Waveform/WAV file/AIFF file) to the
instrument. As with DRAM described above, the created data stored on DIMM is lost when the power is turned off. Because of
this, you should always store any data residing in DIMM to the SmartMedia/USB storage device before turning off the power.
Edit Buffer and User Memory
The edit buffer is the memory location for edited data of these types: Voice, Performance, Master, Song Mixing, and Pattern
Mixing. Data edited in this location will be stored to the User Memory.
If you select another Voice, Performance, Master, Song, or Pattern, the entire contents of the edit buffer will be rewritten with the
newly selected Voice/Performance/Master/Song Mixing/Pattern Mixing data. Make sure to store any important data before
selecting another Voice, etc.
Edit Buffer and Recall Buffer
If you’ve selected another Voice/Performance/Song/Pattern without storing the one you were editing, you can recall your original
edits, since the edit buffer’s contents are stored in backup memory.
nKeep in mind that the recall buffer is not available in the Master Edit mode.
187

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MOTIF ES7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installationsanweisung - Deutsch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Deutsch - 300 seiten

Yamaha MOTIF ES7 Installationsanweisung - Englisch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Holländisch - 300 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Französisch - 300 seiten

Yamaha MOTIF ES7 Installationsanweisung - Französisch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Italienisch - 308 seiten

Yamaha MOTIF ES7 Installationsanweisung - Italienisch - 12 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Portugiesisch - 300 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Spanisch - 297 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info