Bedienungsanleitung Yamaha MOTIF ES7 (Seite 188 von 300) (Englisch)

571272

188

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Voice Mode

Voice Play mode

188 Owner’s Manual

Voice mode

■ Creating Voices — basic procedure

You can create and edit your original Voices by setting various parameters in both the Voice Play mode and Voice Edit mode, while the Voice Job

mode provides some basic parameter-related tools, such as Initialize and Copy. Once you’ve edited a Voice, you can store it to a User Bank in

internal memory (Flash ROM) and save all edited Voices to a SmartMedia/USB storage device in the File mode.

The Voice Play mode lets you perform a variety of general editing operations on the selected voice. For more detailed and comprehensive

editing operations, use the Voice Edit mode.

nIn the Voice Play mode and Voice Edit mode, you can set the parameters for each Voice. The parameters for all the Voices such as Master EQ and Master

Effect can be set from the [UTILITY] → [F3] VOICE display in the Utility mode.

nThe parameters that have the same name in the Voice Play mode and in the Voice Edit mode have the same functions and settings.

nWhen a Plug-in voice is selected, certain parameters are not available for editing, even if they’re described here.

Reference

Voice Play mode [VOICE] → Voice selection

[F1] PLAY

TCH (Transmit Channel) Indicates the Keyboard MIDI transmit channel.

You can change the Keyboard MIDI transmit channel by pressing the [TRACK SELECT] button so that its indicator

lights and pressing any of the NUMBER [1] - [16] buttons. The Keyboard MIDI transmit channel can be changed

also with the following operation: [UTILITY] → [F5] MIDI → [SF1] CH → KBDTransCh.

OCT (Octave) Indicates Keyboard Octave setting set via the [OCTAVE] buttons.

This can be changed also with the following operation: [UTILITY] → [F1] GENERAL → [SF2] KBD → Octave.

ASA (ASSIGN A),

ASB (ASSIGN B) Indicates the functions assigned to the respective Knobs (printed “ASSIGN A” and “ASSIGN B”) when the lamps of

both the [PAN/SEND] and [TONE] buttons are turned on. The functions are assigned with the following operation:

[UTILITY] → [F4] CTL ASN → [SF2] ASSIGN.

nTCH (Transmit Channel), OCT (Octave), ASA (ASSIGN A), and ASB (ASSIGN B) settings do not belong to each Voice. Because of this, these are not stored as an individual

Voice in the Voice Store mode (page 208).

AS1 (ASSIGN 1),

AS2 (ASSIGN 2) Indicates the functions assigned to the respective Knobs (printed “ASSIGN 1” and “ASSIGN 2”) when the lamps of

both the [PAN/SEND] and [TONE] buttons are turned on. The functions are assigned by setting the Voice Edit

common parameters with the following operation: [VOICE] → [EDIT] → [COMMON] → [F4] CTL SET.

[SF1] ARP1 (Arpeggio 1) - [SF5]

ARP5 (Arpeggio 5)

You can register the desired Arpeggio types to these buttons and call them up any time during your keyboard

performance. Refer to page 66 in the Quick Guide section.

[F2] BANK

This display is available only when a Plug-in Board has been installed and a Voice of the Plug-in Board is selected.

From this display you can select the particular bank on the Plug-in board, and determine whether you will be using a Plug-in voice or a “Board” voice. Board

voices are unprocessed, unaltered voices of the Plug-in board – the “raw material” for Plug-in voices. Plug-in voices are edited Board voices – voices that have

been specially programmed and processed for optimum use with this synthesizer. For more details, see page 74.

Settings: The following selections are available, for example, when a Plug-in voice using the Plug-in board installed to slot 1 is selected: PLG1USR (User Plug-in voice), PLGPRE1 (Preset

Plug-in voice), 032/000 ... (Indicates the Bank Select MSB/LSB of the Board voice. These values differ depending on the installed Plug-in board.)

[F3] EFFECT

Pressing the [F3] EFFECT button in the Voice Play mode calls up the same EFFECT display in the Voice Edit mode ([VOICE] → [EDIT] → [COMMON] → [F6]

EFFECT). From this display, you can set the effect related parameters for the current Voice. See page 194.

[F4] PORTA (Portamento)

From this display you can select monophonic or polyphonic playback and set the Portamento parameters.

Portamento is used to create a smooth transition in pitch from the ﬁrst note played on the keyboard to the next.

Mono/Poly Determines whether the Voice is played back monophonically (single notes only) or polyphonically (multiple

simultaneous notes).

Settings: mono, poly

nWhen pressing the second note while holding the ﬁrst note with the PortaSw set to on and the Mono/Poly set to on, the second

note sound starts succeeding the transition of the ﬁrst note, or the second note starts not from the EG (AEG/PEG/FEG) start

point but from the EG (AEG/PEG/FEG) point the ﬁrst note reaches. This realizes the legato performance. This legato degree

can be set with the following operation: [VOICE] → [EDIT] → [COMMON] → [F1] GENERAL → [SF4] PORTA → LegatoSlope

(page 190).

PortaSw (Portamento Switch) Determines whether Portamento is applied to the current Voice or not.

Settings: off, on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 188

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info