Bedienungsanleitung Yamaha MOTIF ES7 (Seite 190 von 300) (Englisch)

571272

190

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Voice Mode

Voice Edit mode Normal Voice Edit Common Edit

190 Owner’s Manual

[SF2] PLY MODE (Play mode) From this display you can make various settings for the tone generator of this synthesizer, and assign different Micro

Tuning settings.

Mono/Poly Determines whether the Voice is played back monophonically (single notes only) or polyphonically multiple

simultaneous notes).

Settings: mono, poly

KeyAsgnMode

(Key Assign Mode) When this is set to “single,” double playback of the same note is prevented. This is useful when two or more

instances of the same note are received nearly simultaneously, or without a corresponding note off message. To

allow playback of each instance of the same note, set this to “multi.”

Settings: single, multi

M. TuningNo.

(Micro Tuning Number) Determines the tuning system for the voice. Normally, this should be set to 00 (Equal temperament); however

additional tuning systems are available for a variety of tuning applications and effects.

Settings: See the Micro Tuning List on page 209.

M. TuningRoot

(Micro Tuning Root) Determines the root note of the Micro Tuning set above.

Settings: C ~ B

[SF3] MEQ OFS

(Master EQ Offset)

From this display you can adjust the master (global) EQ settings for the entire Voice. The settings made here are

applied as offsets to the EQ settings (with the exception of “MID”) from the Utility mode, with the following operation:

[VOICE] → [UTILITY] → [F3] VOICE → [SF1] MEQ. You can edit these parameters by using the Knobs.

Settings: -64 ~ 0 ~ +63

[SF4] PORTA (Portamento) This display allows you to set the Portamento related parameters. Portamento is used to create a smooth transition in

pitch from the ﬁrst note played on the keyboard to the next.

Switch Determines whether Portamento is applied to your keyboard performance using the current Voice or not.

Settings: off, on

Time Determines the pitch transition time. Higher values result in a longer pitch change time, when Time Mode below is

set to “Time.”

Settings: 0 ~ 127

Mode Determines how the Portamento is applied to your keyboard performance.

Settings: ﬁngered, fulltime

ﬁngered............Portamento is only applied when you play legato (playing the next note before releasing the previous one).

fulltime..............Portamento is always applied.

TimeMode This determines how the pitch changes in time.

Settings: rate1, time1, rate2, time2

rate1.................Pitch changes at the speciﬁed rate.

time1 ................Pitch changes in the speciﬁed time.

rate2.................Pitch changes at the speciﬁed rate within a octave.

time2 ................Pitch changes in the speciﬁed time within a octave.

LegatoSlope Determines the speed of the attack of legato notes, when Switch above is set to on and Mono/Poly is set to mono.

(Legato notes “overlap” each other, the next being played before the previous is released.) The higher the value, the

slower the attack rate.

Settings: 0 ~ 7

[SF5] OTHER From this display you can set the control functions for the Knobs, and determine the up/down range for the Pitch

Bend wheel.

Knob Assign Determines the function for the assignable Knobs (1-4). Pressing the [KNOB CONTROL FUNCTION] button on the

panel sets the desired function row, which is automatically stored to memory with the currently selected voice.

Settings: pan, tone, assign, MEQofs, MEF, arpFx

PB Upper

(Pitch Bend range Upper),

PB Lower

(Pitch Bend range Lower)

These two parameters determine the pitch change range of the Pitch Bend wheel.

Settings: -48 ~ 24

AssignA, AssignB,

Assign1, Assign2 Simply tweaking the knob with setting the Knob Assign (above) to “assign” to the desired value, which is

automatically stored to memory with the currently selected voice.

[F2] OUTPUT

Volume Determines the output level of the Voice.

Settings: 0 ~ 127

Pan Determines the stereo pan position of the Voice. You can also adjust this parameter using the PAN knob on the front

panel.

Settings: L63 (Left) ~ C (Center) ~ R63 (Right)

nWhen a stereo Voice is selected, this parameter setting may not be effective. Voices with Elements set to opposite Pan settings

(set in [F4] AMP → [SF1] LVL/PAN → Pan) — i.e., one at L63 and another at R63 — are considered stereo Voices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 190

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info