Bedienungsanleitung Yamaha MOTIF ES7 (Seite 202 von 300) (Englisch)

571272

202

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Voice Mode

Voice Edit mode Drum Voice Edit Common Edit

202 Owner’s Manual

Drum Voice Edit

When a Drum Voice is selected, Voice Edit parameters are divided into Common Edit (parameters common to all keys, up to 73), and Key Edit

(parameters of individual keys).

These parameters are for making global (or common) edits to all keys of the selected Drum Voice.

These parameters are for editing the individual keys that make up a Drum Voice.

Common Edit [VOICE] → Drum Voice selection → [EDIT] → [COMMON]

[F1] GENERAL

[SF1] NAME Same as in Normal Voice Common Edit. See page 189.

[SF3] MEQ OFS (Master EQ Offset)

[SF5] OTHER

[F2] OUTPUT

Same as in Normal Voice Common Edit. See page 190. In addition, the following two parameters are also available.

InsRevSend

(Insertion Reverb Send) Determines the Send level for the entire Drum voice (all keys), sent from Insertion Effect A/B to the Reverb effect.

Settings: 0 ~ 127

InsChoSend

(Insertion Chorus Send) Determines the Send level for the entire Drum voice (all keys), sent from Insertion Effect A/B to the Chorus effect.

Settings: 0 ~ 127

nSend level (to Reverb and Chorus) cannot be set independently for each Drum key; the value is ﬁxed at 127 (maximum).

[F3] ARP (Arpeggio)

[SF1] TYPE Same as in Normal Voice Common Edit. See page 191.

[SF2] LIMIT

[SF3] PLAY FX

[F4] CTL SET (Controller Set)

Same as in Normal Voice Common Edit. See page 192.

Please note that the Element Switch parameter is not available in Drum Voice Common edit.

[F6] EFFECT

Same as in Normal Voice Common Edit. See page 194.

The only difference here is that “KEY: OUT” appears in the [SF1] CONNECT display instead of “EL: OUT” (in Normal Common Effect).

Key Edit [VOICE] → Drum Voice selection → [EDIT] → Key selection

[F1] OSC (Oscillator)

[SF1] WAVE From this display you can select the desired wave or Normal voice used for the individual Drum key.

Type Determines whether a Wave or a Normal voice is to be used for the selected key. Also, use the Bank, Number and

Category parameters below to specify the desired Wave or Normal voice.

Settings: pre wav (Preset wave), voice, usr wav (User wave)

nWhen the Type is set to “voice” here, some parameters in the Drum Voice Edit mode cannot be edited.

ElementSw (Element Switch) This parameter is available when Type (above) is set to “pre wav” or “user wav.” This determines whether the

currently selected key is on or off, or in other words, whether the wave for the key is active or inactive.

Settings: on, off

Bank This parameter is available when Type (above) is set to “voice.” Any of the Normal voice banks can be selected.

nPlug-in voices cannot be selected for Drum keys.

Number Determines the Wave/Voice number. The number differs depending on the selected Type. For details about available

Waves and Voices, refer to the separate Data List booklet.

Settings: When Type is set to “pre wav”: 001 ~ 1859

When Type is set to “voice”: 001 ~ 128

When Type is set to “usr wav”: 001 ~1024

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 202

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info