Bedienungsanleitung Yamaha MOTIF ES7 (Seite 215 von 300) (Englisch)

571272

215

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Performance Mode

Performance Edit mode Common Edit

215

Owner’s Manual

[SF1] OUTPUT

Volume Determines the output level of the Audio Input Part.

Settings: 0 ~ 127

Pan Determines the stereo pan position of the Audio Input Part.

Settings: L63 (Left) ~ C (Center) ~ R63 (Right)

RevSend Determines the Send level of the Audio Input Part signal sent to the Reverb effect.

Settings: 0 ~ 127

ChoSend Determines the Send level of the Audio Input Part signal sent to the Chorus effect.

Settings: 0 ~ 127

DryLevel Determines the level of the Audio Input Part which has not been processed with the System Effects (Reverb,

Chorus).

Settings: 0 ~ 127

nFor details about Effect connection in the Performance mode, see page 179.

Mono/Stereo Determines the signal conﬁguration for the Audio Input Part, or how the signal or signals are routed (stereo or mono).

Settings: stereo, L mono, R mono, L+R mono

stereo............... Both the L and R channels of the audio input are used.

L (left) mono .... Only the L channel of the audio input is used.

R (right) mono . Only the R channel of the audio input is used.

L+R mono........ The L and R channels of the audio input are mixed and processed in mono.

OutputSel (Output Select) Determines the output jack assignment for the Audio Input Part.

Settings: See page 31.

[SF2] INS TYPE (Insertion Type) This display is available only when the AD (A/D Part) is set to on from the [F6] EFFECT → [SF2] INS SW display. The

type and connection of the Insertion Effect applied to the A/D Part can be set from this display.

InsEF Connect

(Insertion Effect Connection) Same as in the CONNECT display in the Voice Edit mode ([VOICE] → [EDIT] → [COMMON] → [F6] EFFECT → [SF1]

CONNECT). Please note that the InsEF Connect cannot be set to “parallel” here.

InsA Ctgry (Insertion A Category)

InsA Type (Insertion A Type)

InsB Ctgry (Insertion B Category)

InsB Type (Insertion B Type)

nInsertion effects can be applied only to the A/D Part, among the Audio Input Parts.

[F6] EFFECT

This menu gives you comprehensive control over the effects. For details about the Effect connections in the Performance mode, see page 179.

[SF1] CONNECT (Connection)

EF PART → PLG-EF

(Plug-in Insertion Effect) Determines the Part to which the Insertion effect is applied. This parameter is available only when a special Effect

Plug-in board (PLG100-VH) has been installed.

Settings: Part 1~4, PartP2~P3, AD, off

Chorus Ctg (Category),

Chorus Type Determines the Chorus effect type.

Settings: Refer to the Effect Types list in the separate Data List booklet.

Chorus Return (Level) Determines the Return level of the Chorus Effect.

Settings: 0 ~ 127

Chorus Pan Determines the pan position of the Chorus effect sound.

Settings: L63 (far left) ~ C (center) ~ R63 (far right)

Chorus to Reverb Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect.

Settings: 0 ~ 127

Reverb Type Determines the Reverb effect type.

Settings: Refer to the Effect Types list in the separate Data List booklet.

Reverb Return Determines the Return level of the Reverb Effect.

Settings: 0 ~ 127

Reverb Pan Determines the pan position of the Reverb effect sound.

Settings: L63 (far left) ~ C (center) ~ R63 (far right)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 215

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info