571272
217
Zoom out
Zoom in
Vorherige Seite
1/300
Nächste Seite
Reference Performance Mode
Performance Edit mode Part Edit
217
Owner’s Manual
[SF5] OTHER
PB (Pitch Bend) Upper,
PB (Pitch Bend) Lower These two parameters are available for Parts 1 - 4 to which the internal Normal Voices are assigned. These
determine the pitch change range (in semitones) of the Pitch Bend wheel for the Part’s Voice. For example, a Lower
setting of -12 would result in the pitch being lowered up to a maximum of one octave (12 semitones) when the Pitch
Bend wheel is moved downwards. Similarly, setting the Upper parameter to +12 would result in a maximum pitch
rise of one octave when the wheel is moved upwards.
Settings: -48 ~0 ~+24
PB (Pitch Bend) Range This parameter is available for Parts 1 - 4 to which the internal Drum Voices are assigned and Plug-in Parts 1 - 3. This
determines the pitch change range (in semitones) of the Pitch Bend wheel. Unlike the Pitch Bend setting for Parts 1
- 4 to which the internal Normal Voices are assigned described above, the Upper and Lower ranges of the Drum
Voice Parts and Plug-in Parts cannot be set independently.
Settings: -24 ~ 0 ~ +24
VelSensDpt
(Velocity Sensitivity Depth) Determines the degree to which the resulting volume of
the tone generator responds to your playing strength.
The higher the value, the more the volume changes in
response to your playing strength (as shown at right).
Settings: 0 ~ 127
VelSensOfst
(Velocity Sensitivity Offset) Determines the amount by which played velocities are adjusted for the actual resulting velocity effect. This lets you
raise or lower all velocities by the same amount — allowing you to automatically compensate for playing too strongly
or too softly.
Settings: 0 ~ 127
[F2] OUTPUT
[SF1] VOL/PAN (Volume/Pan)
Volume Determines the volume for each Part, giving you detailed control over the level balance among the Parts.
Settings: 0~127
Pan Determines the stereo pan position for each Part.
Settings: L63 (far left) ~ C (center) ~ R63 (far right)
VoiceELPan (Voice Element Pan) Determines whether the individual pan settings for each Voice (made via [VOICE] [EDIT] Element selection
[F4] AMP [SF1] LVL/PAN Pan) are applied or not. When this is set to “off,” the basic pan position for the
selected Part is set to center.
Settings: on, off
nThis parameter is not available for the Plug-in Parts.
[SF2] EF SEND (Effect Send) From this display you can set the Send Level and Dry Level sent to the System Effects for each Part. For details
about the Effect connection in the Performance mode, see page 179.
RevSend (Reverb Send) Determines the send level for the Reverb effect of the selected Part, giving you detailed control over the Reverb
balance among the Parts.
Settings: 0~127
ChoSend (Chorus Send) Determines the send level for the Chorus effect of the selected Part, giving you detailed control over the Chorus
balance among the Parts.
Settings: 0~127
Dry Level Determines the level of the unprocessed (dry) sound of the selected Part, letting you control the overall effect
balance among the Parts.
Settings: 0~127
127
0 127
Depth = 127
Depth = 32
Depth = 64
Depth = 0
When Offset (below) is set to 64:
Actual resulting
velocity (affecting the
tone generator)
Velocity with which you play a note
127
0 12764 12764 127
64
127
0
127
0
When Depth (above) = 64 and Offset = 32 When Depth (above) = 64 and Offset = 64 When Depth (above) = 64 and Offset = 96
Actual resulting
velocity (affecting
the tone generator)
Velocity with which you play a note
217

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MOTIF ES7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installationsanweisung - Deutsch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Deutsch - 300 seiten

Yamaha MOTIF ES7 Installationsanweisung - Englisch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Holländisch - 300 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Französisch - 300 seiten

Yamaha MOTIF ES7 Installationsanweisung - Französisch - 35 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Italienisch - 308 seiten

Yamaha MOTIF ES7 Installationsanweisung - Italienisch - 12 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Portugiesisch - 300 seiten

Yamaha MOTIF ES7 Bedienungsanleitung - Spanisch - 297 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info