Bedienungsanleitung Yamaha MOTIF ES7 (Seite 221 von 300) (Englisch)

571272

221

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Song Mode

Song Play mode

221

Owner’s Manual

Song mode

■ Creating Songs — basic procedure

Songs consist of the following three types of data:

• MIDI sequence data (created in the Song Record mode, Song Edit mode, and Song Job mode)

• Setup data (created in the Song Play mode)

• Mixing data (created in the Song Mixing mode/Mixing Edit mode and stored in the Song Mixing Store mode)

After creating the data in these modes described above, store the Mixing settings in the Song Mixing Store mode to archive it as Song data and

save the entire Song to the SmartMedia/USB storage device in the File mode.

nNon-note MIDI events (such as Voice number, volume, pan, and effect send level) which are necessary at the start of a Song are not recorded as MIDI

sequence data, but are stored instead as Mixing data.

Because Song data (MIDI sequence data, Setup data, and Mixing data) is recorded to DRAM (page 187), it will be lost when turning the power off. Make sure

to save any Song data created via the Record, Edit, Job, and Mixing setting to the SmartMedia/USB storage device in the File mode before turning the

power off. For details on saving Song data, see page 132.

Song Play mode [SONG] → Song selection

[F1] PLAY See page 55.

Loc1 (Location1),

Loc2 (Location 2) Indicates the measure number to which the Song playback can be jumped by using the Location feature (page 58).

Trans (Transpose) Determines the key transpose setting for the entire Song, and can be adjusted in semitones.

Settings: -36 ~ +36

nIf Transpose is applied to a Drum Voice, the results may not be musically appropriate. To ensure proper playback of a Drum

Voice, set the Note Shift parameter for the Drum Voice Part to an appropriate value ([SONG] → [MIXING] → [EDIT] → Part

selection → [F4] TONE → [SF1] TUNE → NoteShift).

MEAS (Measure) Indicates the current measure number and beat for the current Song. During playback, this indication changes

automatically according to the Song playback. You can input the desired measure number directly by using the

Number Input window called up via the [INFORMATION] button.

[SF1] ARP1 (Arpeggio 1) - [SF5]

ARP5 (Arpeggio 5)

You can register the desired Arpeggio types to these buttons and call them up any time during your keyboard

performance. Refer to page 105 in the Quick Guide section.

[F2] GROOVE (Grid Groove)

The Grid Groove function makes it possible to adjust the pitch, timing, length, and velocity of notes

in a speciﬁed track via a 1-measure 16th-note grid to create “grooves” that would not be possible

with precise sequencer-like programming. The Grid Groove function affects Song playback without

actually changing the sequence data.

NOTE OFST (Note Offset) Raises or lowers the pitch of the note(s) on the selected grid in semitones.

Settings: -99 ~ +99

CLOCK SFT (Clock Shift) Shifts the timing of the note(s) on the selected grid forward or back ward in clock increments.

Settings: -120 ~ +120

GATE OFST (Gate time Offset) Lengthens or shortens the note(s) on the selected grid in clock increments.

Settings: -120 ~ +120

VELO OFST (Velocity Offset) Increases or decreases the velocity of the note(s) on the selected grid.

Settings: -127 ~ +127

[F3] TRACK

[SF1] CHANNEL From this display you can set the MIDI output channel/port for each of the sixteen tracks of the corresponding

internal/external tone generator.

OUT CH (Output Channel) Sets up the MIDI output channel for each track. Tracks set to “Off” will not sound.

Settings: off, 01 ~ 16

nIn the Song/Pattern mode, the MIDI message created by playing the keyboard/knobs/wheels is sent to the tone generator

block or the external MIDI instruments via the MIDI output channel of the currently selected track.

CAUTION

VELO OFST (Velocity Offset)

GATE OFST (Gate Time Offset)

CLOCK SFT (Clock Shift)

NOTE OFST (Note Offset)

–

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 221

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info