Bedienungsanleitung Yamaha MOTIF ES7 (Seite 222 von 300) (Englisch)

571272

222

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Song Mode

Song Record mode Song Record Standby mode

222 Owner’s Manual

Song Record Standby mode

PORT Determines the MIDI transmission port for the corresponding track. Playback data of tracks set to off is output

without Port signal via MIDI.

When using the internal tone generator block, the Port setting here is available for the tracks assigned to the Plug-in

Parts 1-3 (when the single Plug-in Board has been installed) and Multi Plug-in Parts 17-32 (when the PLG100-XG

has been installed) are assigned. Tracks using the internal tone generator parts of this synthesizer are automatically

ﬁxed to Port 1.

Settings: off, 1 ~ 3

nPort data can be output only through the USB terminal. No port data is transmitted through the MIDI OUT terminal, even if the

corresponding track is set to a speciﬁc port number.

[SF2] OUT SW (Output Switch)

INT SW (Internal Switch) Determines whether playback data is transmitted to the internal tone generator block or not.

Settings: on, off

EXT SW (External Switch) Determines whether playback data is output to the external MIDI tone generator via MIDI or not.

Settings: on, off

[SF3] TR LOOP (Track Loop) From this display you can determine whether the data in the selected track loops or not in playback. Using Loop can

be an effective way to repeat short patterns and phrases throughout the Song. For details, see page 238.

Settings: off, on

[F5] PHRASE

You can copy Pattern track data (Phrase) to a Song track. You can also copy preset

phrases that are not assigned to the Pattern track by using the Patch function (page

241). For details, refer to page 113 in the Quick Guide section.

[F6] CHAIN

This function allows Songs to be “chained” together for automatic sequential playback. For details, refer to the Quick Guide on page 59.

skip..................Skips past (ignores) the selected chain number and continues playback from the next chain number.

stop .................Stops Song chain playback at that chain number. You can restart the Song chain playback from the next chain number by pressing the [F] (Play) button.

end...................Indicates the end mark of the Song chain data.

Song Record mode [SONG] → Song selection → [I] (Record)

[F1] SETUP

Type (Recording Type) Determines the recording method. For details on each method, refer to page 168 in the Basic Structure section.

Settings: When the RecTrack is set to any of 1-16: replace, overdub, punch, step

When the RecTrack is set to tempo: replace, punch, step

When the RecTrack is set to scene: replace, punch

When the RecTrack is set to multi: replace, overdub, punch

nWhen “punch” is selected, “Punch-in measure: beat” and “Punch-out measure: beat” appear in the display and should be set.

If you’ve set the Locate 1 and 2 points (Loc1, Loc2; see page 58), the punch-in/out points can be set with a single button

press. Move the cursor to the punch-in/out value, and notice that a “COPYLOC” menu item appears. Press the [SF1]

COPYLOC button, and the punch-in/out settings are automatically assigned to the existing Locate points.

nWhen “step” is selected, you should specify the event type to be entered.

Quantize This parameter is available when the Recording Type is set to something other than “step.” Record quantize aligns

the timing of notes automatically, as you record.

You can set this parameter also by using the Note Type selection window called up via the [INFORMATION] button.

For details, see page 49.

Settings: off, 60 (32nd note), 80 (16th note triplet), 120 (16th note), 160 (8th note triplet), 240 (8th note), 320 (1/4 note triplet), 480 (1/4

note)

Source Phrase

If sample data is included in the original

Phrase and you want to copy all of the

data, make sure to checkmark this box.

After completing the settings,

press the [ENTER] button to

execute Copy Phrase.

Specify the destination track and

measure of the current selected

song.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 222

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info