Bedienungsanleitung Yamaha MOTIF ES7 (Seite 224 von 300) (Englisch)

571272

224

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Song Mode

Song Record mode During Song Recording Step Recording

224 Owner’s Manual

[F6] ALL TR (All Track)/1TR (1 track)

Pressing the [F6] button lets you switch between Single Track recording and All Track recording.

During Song Recording [SONG] → Song selection → [I] (Record) → [F] (Play)

Realtime Recording Refer to page 118 in the Quick Guide section.

Step Recording Examples of Step Recording are described on page 238.

[F1] SETUP

Beat Graph This is the display in which notes are “placed” during step recording. When the meter is 4/4, the display is divided

into four beats (one measure). Each diamond-shaped marker in the display represents one 32nd beat (each 1/4 note

division is divided into eight 32nd beats).

For example, if the following rhythmic pattern “ ” is entered in 4/4 time, a display like the one shown

above right will appear.

Pointer Determines the data-entry position. The triangular pointer above the beat graph indicates the data-entry position. To

move the pointer right or left, use the [INC/YES] and [DEC/NO] buttons or the data dial.

Value When the Event to be entered ([F1] SETUP → Event) is set to “note,” this value speciﬁes the velocity with which the

note will be entered.

Settings: When the Event is set to “note”: 1 ~ 127, kbd, rnd1 ~ rnd4

When the Event is set to “p.bend”: -8192 ~ +8191

When the Event is set to “CC (Control Change 001 - 119)”: 000 ~ 127

When the Event is set to “tempo” with the RecTrack = tempo: 001 ~ 300

nYou can select “kbd” (keyboard) and “rnd1” - “rnd4” (random1 - 4) as well as the values 1 - 127 when the Event to be entered

is set to “note.” When “kbd” is selected, the actual playing strength will be entered as the velocity value. When one of the

random settings is selected, a random velocity value will be entered.

StepTime The “size” of the current recording step time for the next note to be entered. This determines to what position the

pointer will advance after a note has been entered.

Settings: 0001 - 0059, 32nd note, 16th note triplet, 16th note, 8th note triplet, 8th note, 1/4 note triplet, 1/4 note, half note, whole note

GateTime Sets the gate time to produce slurs, staccato notes, etc. “Gate time” refers to the actual length of time the note

sounds. For the same 1/4 note, for example, a long gate time will produce a slur while a short gate time will produce

a staccato effect. Gate time is indicated as a percent value of the step time. A setting of 50% produces a staccato

sound, values between about 80% and 90% produce normal note length, and a value of 99% will produce a slur.

Settings: 1% ~ 200%

[F3] REST

Press [F3] to enter a rest as long as the speciﬁed step time. The point will move ahead to the next data-entry position. Rests do not appear on the display.

nThere is no actual data representing rests in the MIDI sequencer. When a “rest” is entered the pointer simply moves ahead to the next data-entry position, effectively leaving a rest.

[F4] TIE

When the [F4] button is pressed to enter a tie, the preceding note is lengthened to the full step time.

For example, in the phrase shown at left, note 1 is entered with 1/4 note step time. If the step time is then changed

to an 8th note and [F4] is pressed, note 2 is entered.

Dotted notes can also be entered using the TIE function. To produce a dotted 1/4 note, for example, set the step

time to an 8th note, enter a note and then press [F4] twice.

nThis display is available only when the Event to be entered is set to “note.”

Pointer indicating the current note position.

Beat Graph

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 224

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info