Bedienungsanleitung Yamaha MOTIF ES7 (Seite 230 von 300) (Englisch)

571272

230

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Song Mode

Song Job mode

230 Owner’s Manual

04: Extract Event This Job moves all instances of speciﬁed event data from a speciﬁed range of a track to the same range in a

different track.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16) and range of measures/beats/clocks over which the Job is applied.

EventType Selects the event type to be extracted. Speciﬁc note and control change numbers can also be speciﬁed as required.

Settings: Note, PC (Program Change), PB (Pitch Bend), CC (Control Change), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch),

EXC (System Exclusive)

→ TR Determines the destination track (01 - 16).

05: Create Continuous Data This Job creates continuous pitch bend or control change data over the speciﬁed range.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16, TMP, all) and range of measures/beats/clocks over which the Job is applied.

EventType Determines the event type to be created.

Settings: PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch), EXC (System Exclusive), TMP (Tempo)

* You can also specify the CC No. (Control Change number).

Data (Data Range) Determines the lower and upper limits for the data range to be created. The left value is the lower limit, and the right

value is the upper limit.

Settings: When Event Type is set to PB: -8192~+8191

When Event Type is set to TMP: 1.0~300.0

When Event Type is set to other: 0~127

Clock Determines the number of clocks to be inserted between each created event.

Settings: 001~999

Curve Determines the “curve” of the continuous data.

Refer to the graph for approximate curve shapes.

Settings: -16 ~+16

NumberOfTimes Determines the number of times the data creation is to be repeated.

For example, if data is created in the range M001:1:000 ~ M003:1:000 and this parameter is set to 03, the same data

will be created at M003:1:000 ~ M005:1:000 and M005:1:000 ~ M007:1:000. This Job lets you insert continuous

volume or ﬁlter cutoff variations to create tremolo or wah effects.

Settings: 01~99

06: Thin Out This Job thins out the speciﬁed type of continuous data in the speciﬁed range — allowing you to free up memory

space for other data or further recording.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16, TMP, all) and range of measures/beats/clocks over which the Job is applied.

EventType Determines the event type to be thinned.

Settings: PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), TMP (Tempo)

* You can also specify the CC No. (Control Change number).

nThe Thin Out Job will not work on continuous data that has a clock interval of greater than 60 clocks per event.

07: Modify Control Data This Job lets you change the values of a speciﬁed type of control change data — pitch bend, control change,

aftertouch, etc. — in the speciﬁed range. Data changes are calculated as follows:

Modiﬁed value = (original value x Rate) + Offset.

The modiﬁed value cannot exceed the minimum/maximum limits of the parameter. Any result lower than the minimum

is set to the minimum; any result higher than the maximum is set to the maximum.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01 - 16, TMP, all) and range of measures/beats/clocks over which the Job is applied.

EventType Determines the event type to be modiﬁed.

Settings: PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), TMP (Tempo)

* You can also specify the CC No. (Control Change number).

SetAll Sets all target events to the same ﬁxed value. When set to “off,” the Set All parameter has no effect. When set to a

value other than “off,” the Rate and Offset parameters are unavailable and appear as “***” on the display.

Settings: off, 000 ~127 (-8192 ~ +8191 for pitch bend, 0.1 ~ 300.0 for tempo)

Rate Determines the percentage by which the target events will be shifted from their original values. When the Set All

parameter (above) is set to something other than “off,” this parameter appears as “***” and cannot be changed.

Settings: 000% ~ 200%, ***

Offset Adds a ﬁxed value to the Rate-adjusted event values. When the Set All parameter (above) is set to something other

than “off,” this parameter appears as “***” and cannot be changed.

Settings: -127~127 (-8192 ~ +8191 for pitch bend, -275 ~ +275 for tempo), ***

Curve = +16 Curve = 0 (linear) Curve = -16

Start point

End point

This distance speciﬁed by Clock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 230

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info