Bedienungsanleitung Yamaha MOTIF ES7 (Seite 228 von 300) (Englisch)

571272

228

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Song Mode

Song Job mode

228 Owner’s Manual

Rate Determines the percentage by which the gate time of the target notes will be changed.

Settings below 100% shorten the notes, and settings above 100% lengthen the notes proportionately. When the Set

All parameter (above) is set to something other than “off,” this parameter appears as “***” and cannot be changed.

Settings: 000% ~ 200%, ***

Offset Adds a ﬁxed value to the Rate-adjusted gate time values. A setting of 0 produces no change. Settings below 0

shorten the gate time, and settings above 0 lengthen the gate time. When the Set All parameter (above) is set to

something other than “off,” this parameter appears as “***” and cannot be changed.

Settings: -9999 ~ +9999, ***

04: Crescendo This Job lets you create a crescendo or decrescendo over the speciﬁed range of notes. (Crescendo is a gradual

increase in volume, and decrescendo is a gradual decrease.)

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.

VelocityRange Determines the intensity of the crescendo or decrescendo. The velocity values of the notes in the speciﬁed range

are gradually increased or decreased starting at the ﬁrst note in the range. The velocity of the last note in the range

becomes the original velocity of the note plus the Velocity Range value. If the resultant velocity is outside the 1 ~ 127

range, it is set to 1 or 127 accordingly. Settings greater than 0 produce a crescendo, and settings less than 0

produce a decrescendo. A setting of 0 produces no effect.

Settings: -127 ~ +127

05: Transpose Transpose lets you change the key or pitch of the notes in the speciﬁed range.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.

Note Determines the range of note pitches over which the Job is applied. You can also set the Note directly from the

Keyboard, by holding down the [INFORMATION] button and pressing the desired key (page 53).

Settings: C-2 ~ G8

Transpose Transposes notes in the speciﬁed range (in semitones). A setting of +12 transposes up one octave, while a setting of

-12 transposes down an octave. A setting of 0 produces no change.

Settings: -127 ~ +127

06: Glide The Glide Job replaces all notes following the ﬁrst note in the speciﬁed range with pitch bend data, producing

smooth glides from note to note. This is ideal for producing guitar-like slide or note-bending effects.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.

GlideTime Determines the length of the glide. Higher values produce a longer glide between notes.

Settings: 000~100

PBRange (Pitch Bend Range) Determines the maximum pitch bend range to be applied by the Glide Job (in semitones).

Settings: 01~24

07: Create Roll This Job creates a series of repeated notes (like a drum roll) in the speciﬁed range with the speciﬁed continuous

changes in clock step and velocity. This is ideal for creating fast staccato rolls and special stuttering effects.

TR (Track)

001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16) and range of measures/beats/clocks over which the Job is applied.

StartStep (Starting Step)

EndStep (Ending Step) Determines the size of the step (i.e. the number of clocks) between each note in the roll. Both the starting and

ending clock values can be speciﬁed, making it easy to create rolls in which the step size varies during the roll.

Settings: StartStep: 001~999, EndStep: 001~999

Note Determines the speciﬁc note (or instrument in Drum voices) for the roll effect. You can also set the note directly from

the Keyboard, by holding down the [INFORMATION] button and pressing the desired key (page 53).

Settings: C-2~G8

StartVelo (Starting Velocity)

EndVelo (Ending Velocity) Determines the velocity of the notes in the roll. Both the starting and ending velocity values can be speciﬁed, making

it easy to create rolls in which the velocity increases or decreases. This lets you create rolls that gradually increase or

decrease in volume (crescendo/decrescendo) — a technique often used in dance music.

Settings: StartVelo: 001~127, EndVelo: 001~127

08: Sort Chord This Job sorts chord events (simultaneous note events) by order of pitch. The sort affects the order of the notes in

the Event List display (page 124), but does not change the timing of the notes. When used to pre-process chords

before using the Separate Chord Job (below), Chord Sort can be used to simulate the “stroke” or strumming sound

of guitars and similar instruments.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 228

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info