Bedienungsanleitung Yamaha MOTIF ES7 (Seite 264 von 300) (Englisch)

571272

264

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Utility Mode

Utility mode

264 Owner’s Manual

KBDTransCh

(Keyboard Transmit Channel) Determines the MIDI channel over which the instrument sends MIDI data (to an external sequencer, tone generator,

or other device). This parameter is available in the single-timbre tone generator mode (Voice/Performance modes).

Settings: 1~16, off

nIn the multi-timbral tone generator mode (Song/Pattern modes), MIDI data generated by playing the keyboard (and its

controllers) is sent to the internal tone generator and external devices via the MIDI output channel, set from the CHANNEL

display ([SONG] or [PATTERN] → [F3] TRACK → [SF1] CHANNEL).

DeviceNo. (Device Number) Determines the device number used by this synthesizer in receiving or transmitting data. This number must match

the Device Number of the external MIDI device when transmitting/receiving bulk data, parameter changes or other

system exclusive messages.

Settings: 1~16, all, off

[SF2] SWITCH

BankSel This switch enables or disables Bank Select messages, both in transmission and reception. When this is set to “on,”

this synthesizer responds to incoming Bank Select messages, and it also transmits appropriate Bank Select

messages (when using the panel).

Settings: off, on

PgmChange (Program Change) This switch enables or disables Program Change messages, both in transmission and reception. When this is set to

“on,” this synthesizer responds to incoming Program Change messages, and it also transmits appropriate Program

Change messages (when using the panel).

Settings: off, on

CtrlChange

(Control Change mode) Determines how this synthesizer receives and recognizes the AEG Sustain MIDI message. When set to mode1, it is

received as a Parameter Change. When set to mode2, it is received as a Control Change message.

Settings: mode1, mode2

LocalCtrl (Local Control On/Off) This determines whether or not the tone generator of the instrument responds to your keyboard playing. Normally,

this should be set to “on” — since you’ll want to hear the sound of the MOTIF ES as you play it. However, for external

sequencer applications, you may need to set this to “off” to avoid getting “double” notes, in which the tone generator

of the instrument is played twice — once by the keyboard and once again by the keyboard data routed through the

sequencer.

Even if this is set to “off,” the data will be transmitted via MIDI. Also, the internal tone generator block will respond to

messages received via MIDI.

Settings: off, on

RcvBulk (Receive Bulk) Determines whether or not Bulk Dump data can be received.

Settings: protect (not received), on (received)

[SF3] SYNC (Synchronization) From this display you can set various parameters related to MIDI clock and synchronization.

MIDI Sync Determines whether Song/Pattern/Arpeggio playback will be synchronized to the instrument’s internal clock or an

external MIDI clock.

Settings: internal, MIDI, MTC

internal ..............................Synchronization to internal clock. Use this setting when this synthesizer is to be used alone or as the master

clock source for other equipment.

MIDI ..................................Synchronization to a MIDI clock received from an external MIDI instrument via MIDI.

MTC (MIDI Time Code).....Synchronization to an MTC signal received via MIDI. MMC signals are transmitted via MIDI. Use this setting

when this synthesizer is to be used as a MIDI slave, such as when synchronized to an MTC-capable MTR.

The MTC Sync function is available only in the Song mode.

nPlease keep in mind that the song or pattern will not start even if you press the [F] (Play) button when the MIDI Sync is set to

other than “internal.”

nMTC (MIDI Time Code) allows simultaneous synchronization of multiple audio devices via standard MIDI cables. It includes

data corresponding to hours, minutes, seconds, and frames. This synthesizer does not transmit MTC. A device such as the

Yamaha AW4416 is necessary in order to use this synthesizer as an MTC master.

nMMC (MIDI Machine Control) allows remote control of multitrack recorders, MIDI sequencers, etc. A MMC-compatible

multitrack recorder, for example, will automatically respond to start, stop, fast forward, and fast reverse operations performed

on the controlling sequencer, thus keeping playback of the sequencer and multitrack recorder aligned.

ClockOut Determines whether MIDI clock (F8) messages will be transmitted via MIDI.

Settings: on (transmitted), off

SeqCtrl (Sequencer Control) Determines whether Sequencer Control signals – start, continue, stop, and song position pointer – will be received

and/or transmitted via MIDI.

Settings: off, in, out, in/out

off .....................Not transmitted/recognized.

in ......................Recognized but not transmitted.

out ....................Transmitted but not recognized.

in/out ...............Transmitted/recognized.

MTC StartOffset Determines the speciﬁc time code point from which sequence playback starts, when MTC is received. This feature

can be used to accurately align playback of this synthesizer with an external MTC-compatible device.

Settings: Hour : Minute : Second : Frame

Hour ................00~23

Minute .............00~59

Second ............00~59

Frame ..............00~29

Yamaha MOTIF ES7 Seite 264

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info