Bedienungsanleitung Yamaha MOTIF ES7 (Seite 262 von 300) (Englisch)

571272

262

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference Utility Mode

Utility mode

262 Owner’s Manual

[SF1] MEQ (Master EQ) From this display you can apply ﬁve-band equalization to all Voices, raising or lowering the level of each frequency

band (LOW, LOWMID, MID, HIGHMID, HIGH).

The parameters are the same as in the Performance Common Edit. See page 214.

Settings: For details about EQ, see page 178.

[SF2] MEF (Master Effect) From this display you can set the Master Effect related parameters applied to all the Voices. This display can be

called up by pressing and holding the [MASTER EFFECT] button on the front panel in the Voice mode.

The parameters are the same as in the Performance Common Edit. See page 214.

[SF3] ARP CH

(Arpeggio Channel)

From this display you can set parameters related to output of the Arpeggio MIDI data in the Voice mode.

OutputSwitch This enables or disables MIDI data output for the Arpeggio function. When this is set to “on,” Arpeggio data is sent

via MIDI — allowing you to send the Arpeggio data to an external sequencer or play back the Arpeggios on

connected MIDI tone generators.

Settings: on (enable), off (disable)

TransmitCh (Transmit channel) Determines the MIDI channel through which Arpeggio playback data will be sent (when Output Switch above is on).

Settings: 1 ~ 16

[SF4] CTL ASN

(Controller Assign)

Sets the parameters related to the controllers in the Voice mode.

Details on each parameter are the same as in Performance Common Edit. See page 214.

[F3] SEQ (Sequencer) [SONG] or [PATTERN] → [UTILITY] → [F3]

These special song- and pattern-related settings are available only when entering the Utility mode from the Song or Pattern mode.

[SF1] CLICK From this display you can set the parameters related to the click sound (metronome) that is used during recording or

playback in the Song/Pattern mode.

Mode Determines whether and when the metronome click will sound.

Settings: off, rec, rec/play, all

off .....................The click will not sound.

rec ....................The click will sound during song/pattern recording only.

rec/play ............The click will sound during song/pattern recording and playback.

all .....................The click will always sound.

Beat Determines on which beats the metronome click will sound.

Settings: 16 (16th notes), 08 (8th notes), 04 (quarter notes), 02 (half notes), 01 (whole notes)

Volume Determines the click sound volume.

Settings: 0 ~ 127

Type Determines the click sound type.

Settings: 1 ~ 10

RecCount Sets the number of count-in measures provided before recording actually starts after pressing the [F] (Play)

button in the Record standby mode.

Settings: off (Recording starts as soon as the [F] button is pressed), 1 meas ~ 8 meas

SmplPrCnt (Sampling pre-count) This is available when entering the Sampling mode from the Song mode/Pattern mode, setting the Type to

“sample+note” then setting the Trigger mode to “meas.” This parameter sets the number of count-in measures

provided before a song/pattern starts after starting sampling.

nSince the click sound is created with the internal tone generator, using click playback affects the overall polyphony of this synthesizer.

[SF2] FILTER (MIDI Filter) From this display you can set which MIDI events will be recognized/transmitted via MIDI. The settings made here

apply only to Song/Pattern playback data; they do not affect the MIDI events generated by your keyboard playing or

panel operations in the Voice and Performance modes.

MIDI events to which the Filter is applied:

Note, PgmChange (Program Change), CtrlChange (Control Change), PB (Pitch Bend), ChAt (Channel Aftertouch), PolyAT (Polyphonic

Aftertouch), Exclusive

[SF3] OTHER

PtnQuantize (Pattern Quantize) Determines the quantize value for Pattern switching during playback. When set to “1,” Patterns (sections) will always

switch on the ﬁrst beat of the measure during playback. When “1/16” is selected, Patterns (sections) can be

switched on any 16th beat during playback.

Settings: 1 (1 measure), 1/2 (Half note), 1/4 (Quarter note), 1/8 (8th note), 1/16 (16th note)

PtnTempoHold

(Pattern Tempo Hold) Determines whether or not the tempo setting will switch to the tempo value stored with each Pattern when a new

Pattern is selected during playback. When set to “on,” the tempo will be retained when Patterns are switched. When

set to “off,” the tempo will switch to that stored with the new Pattern when Patterns are switched.

Settings: on, off

nThe tempo setting data in the Pattern Chain is not affected by this parameter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 262

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info