Bedienungsanleitung Yamaha MOTIF ES7 (Seite 268 von 300) (Englisch)

571272

268

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

Reference File Mode

Supplementary information

268 Owner’s Manual

■ Supplementary information

File ( )/Folder ( ) selection

The illustrations and instructions below show you how to select ﬁles

and folders on the SmartMedia/USB storage devices within the File

mode.

Formatting a SmartMedia/USB storage device

Before you can use a new SmartMedia/USB storage device with this

synthesizer, you will need to format it. Follow the instructions below.

If data is already saved on the SmartMedia/USB storage device, be careful

not to format it. If you format the SmartMedia/USB storage device, all the

previously recorded data will be deleted.

1Insert a SmartMedia into the CARD slot or connect a USB

storage device to the USB TO DEVICE connector.

If necessary, insert the proper media into the slot of the USB

storage device.

2Press the [FILE] mode to enter the File mode.

3Press the [F1] CONFIG button, then [SF3] FORMAT

button to call up the Format display.

4Select the media to be formatted.

Move the cursor to the Format value location and select “CARD”

or “USB.” When selecting “USB,” specify the slot number at the

right top of the display as necessary and select the partition to

be formatted at the Type value location in the second line of the

display.

5Set the Volume Label.

Move the cursor to the “Volume Label” and input a Volume Label.

For instructions on naming, refer to page 53 in the Basic

Operation section.

6Press the [ENTER] button. (The display prompts you for

conﬁrmation.)

Press the [DEC/NO] button to cancel the Format operation.

7Press the [INC/YES] button to execute the Format.

After formatting has been completed, a “Completed” message

appears and operation returns to the original display.

While formatting is in process, make sure to follow these precautions:

• Never remove or eject the media from the device (SmartMedia or

USB storage).

• Never unplug or disconnect any of the devices.

• Never turn off the power of the MOTIF ES or the relevant devices.

8Press the [SF1] CURRENT button and check whether the

currently recognized device is “CARD” (SmartMedia in

the CARD slot) or “USB” (USB storage device connected

to this synthesizer).

Change the Current setting as needed.

nBy executing the Format operation in the File mode, the SmartMedia/

USB storage device will be formatted to MS-DOS or Windows format.

The formatted SmartMedia/USB storage device may not be

compatible with other devices such as a Macintosh computer or

digital camera.

Move the cursor to the desired ﬁle or folder by using the [INC/YES] and

[DEC/NO] buttons or the data dial.

To return to the next

highest level, press

the [EXIT] button.

To call up the contents of a

desired folder, highlight the

folder and press the [ENTER]

button.

Move the cursor to the desired ﬁle or folder by using the [INC/YES]

and [DEC/NO] buttons or the data dial.

CAUTION

Volume Level of the selected partition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF ES7 Seite 268

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF ES7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info