Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 69 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Voice Mode

MOTIF-RACK XS Owner’s Manual

Basic Structure

Voice

MultiUtility

Reference

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

AEG Attack

AEG Decay

AEG Sustain

AEG Release

These can be used to control the change in volume from the moment a note is played to the moment

the sound stops. The settings made here will be applied to the same parameters in the AEG (page

80) of Element Edit as offset. Each parameter can be changed directly via the Knob.

Settings: -64 – +0 – +63

6 LFO (Common LFO)

Determines how the vibrato, tremolo and wah effect are produced by using the LFO (Low Frequency Oscillator). The Common LFO

parameter settings commonly affect all elements of the Voice.

Wave Selects the Wave and determines how the LFO waveform vibrates.

Settings: triangle, triangle+, saw up, saw down, squ1/4, squ1/3, square, squ2/3, squ3/4, trapezoid, S/H1, S/H2, user

user ................................... You can use your original LFO wave by selecting this as the LFO wave. The LFO wave can be

created only on the MOTIF-RACK XS Editor. For details about setting, see USER LFO

parameters (page 71).

Play Mode Determines whether the LFO cycles repeatedly (loop) or only once (one shot).

Settings: loop, one shot

Speed Determines the speed of the LFO Wave. The higher the value, the faster the speed. This parameter

cannot be set when “Tempo Sync” is set to “on.”

Settings: 0 – 63

Phase Determines the starting phase point for the LFO Wave

when it is reset.

Settings: 0°, 90°, 120°, 180°, 240°, 270°

Tempo Sync Determines whether or not the LFO speed is synchronized to the tempo of the Arpeggio.

Settings: off (not synchronized), on (synchronized)

n When this parameter is set to “on” and “MIDI Sync” in the MIDI display of the Utility (page 99) is set to “external” or

“auto,” the LFO speed is synchronized with the external clock.

Tempo Speed This parameter is available only when Tempo Sync above has been set to “on.” It allows you to make

detailed note value settings that determine how the LFO pulses in sync with the Arpeggio.

Settings: 16th, 8th/3 (eighth-note triplets), 16th. (dotted sixteenth note), 8th (eighth note), 4th/3 (quarter-note triplets), 8th

(dotted 8th note), 4th (quarter notes), 2nd/3 (half-note triplets), 4th. (dotted quarter notes), 2nd (half notes),

whole/ 3 (whole-note triplets), 2nd. (dotted half note), 4thx4 (quarter-note quadruplets; four quarter notes to the

beat), 4thx5 (quarter-note quintuplets; ﬁve quarter notes to the beat), 4thx6 (quarter-note sextuplets; six quarter

notes to the beat), 4thx7 (quarter-note septuplets; seven quarter notes to the beat), 4thx8 (quarter-note octuplets;

eight quarter notes to the beat), 4thx16 (sixteen quarter notes to the beat), 4thx32 (32 quarter notes to the beat),

4thx64 (64 quarter notes to the beat)

n The note type setting above is synchronized with the tempo of the Arpeggio playback.

Key on Reset Determines whether or not the LFO is reset each time a Note On message is received. The following

three settings are available.

Settings: off, each-on, 1st-on

off

The LFO cycles freely with no key synchronization. Receiving a Note On

message starts the LFO wave at whatever phase the LFO happens to be at that

point.

each-on

The LFO resets with each received Note On message and starts a waveform at

the phase speciﬁed by the Phase parameter (above).

1st-on

The LFO resets with each received Note On message and starts a waveform at

the phase speciﬁed by the Phase parameter (above). If a second Note On

message is received while the ﬁrst is being held, the LFO continues cycling

according to the same phase as triggered by the ﬁrst note. In other words, the

LFO only resets if the ﬁrst Note Off message is received before the second

Note On message is received.

n The starting phase is determined by the “Phase” parameter although

the starting phase is shown as 0 in the illustration.

Random Speed Determines the degree to which the LFO speed changes randomly. A setting of “0” results in the

original speed. Higher values result in a larger degree of random speed change.

This parameter cannot be set when “Tempo Sync” is set to on.

Settings: 0 – 127

0° 90°

120°

240°

180° 270°

Phase

Time

Key On

Time

Key On

(ﬁrst note)

Key On

(second note)

Time

Key On

(ﬁrst note)

Key On

(second note)

Time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info