Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 98 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Utility

MOTIF-RACK XS Owner’s Manual

Basic Structure

Reference

Voice

Multi Utility

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

In the Utility parameters, you can set parameters that apply to the entire system of the MOTIF-RACK XS. Pressing the [UTILITY]

button in the Voice or Multi mode calls up the relevant Utility parameters of the current mode. Pressing the [EXIT] button returns

to the original display.

Utility

Procedure

[UTILITY] ➝ Select the desired window in the Utility Select window ➝ [ENTER] ➝ Edit window

1 General

Volume Determines the overall volume of the instrument.

Settings: 0 – 127

Note Shift Determines the amount (in semitones) by which the pitch of all notes is shifted.

Settings: -24semi – +0semi – +24semi

Tune Determines the tuning of the MOTIF-RACK XS’s overall sound. You can adjust the tuning in cent

increments.

Settings: -102.4cents [414.7Hz] – +0cents [440.0Hz] – +102.3cents [466.8Hz]

mLAN monitor

(mLAN monitor switch)

Determines the audio signal ﬂow for monitoring the sound when using the MOTIF-RACK XS with

DAW software installed on a computer connected to the MOTIF-RACK XS via an IEEE1394 cable.

n You will need to properly set up the DAW software in addition to making the settings here. For details, see the

“Connecting to a Computer and MIDI device” on page 17.

Settings: stand alone, with PC, with PC (Mntr)

stand alone............ When this is selected, the audio signal of the MOTIF-RACK XS will be output directly via the OUTPUT L/

MONO and R jacks normally. This should be selected when you are using the MOTIF-RACK XS alone or

are not using the DAW software even with a computer connected to the MOTIF-RACK XS via an

IEEE1394 cable.

with PC .................. When this is selected, the audio signal of the MOTIF-RACK XS will be output to the DAW software on a

computer via an IEEE1394 cable, merged and mixed with the DAW sound, returned back to the MOTIF-

RACK XS, then output via the OUTPUT L/MONO and R jacks. This should be selected when you are

using the MOTIF-RACK XS as an audio device with the DAW software. Selecting this allows you to apply

VST Effects within the DAW software to the MOTIF-RACK XS sound.

with PC (Mntr)........The audio signal of the MOTIF-RACK XS will be output directly via the OUTPUT L/MONO and R jacks

with the audio signal sent from the DAW software via an IEEE1394 cable. This should be selected when

recording the MOTIF-RACK XS sound to the DAW software on the computer. Keep in mind that the Rec

Monitor of the DAW software should be set to “off” in order to prevent “double” sound from occurring.

n When “with PC” is selected, there may be a short delay between when you play an external keyboard and when

you hear the resulting sound.

Power on Mode This determines the default power-on mode (and memory bank)—letting you select which condition

is automatically called up when you turn the power on.

Settings: multi, voice (USR1), voice (PRE1), voice (GM)

multi....................... When turning the power on next time, the Multi mode is entered and the ﬁrst program number (USR:

001) is selected automatically.

voice (USR1) ......... When turning the power on next time, the Voice mode is entered and the ﬁrst program number of the

User Voices (USR: 001) is selected automatically.

voice (PRE1)..........When turning the power on next time, the Voice mode is entered and the ﬁrst program number of the

Preset Voices (PRE1: 001) is selected automatically.

voice (GM).............When turning the power on next time, the Voice mode is entered and the ﬁrst program number of the

GM Voices (GM: 001) is selected automatically.

Layer 1-4 Parts

(Layer 1 – 4 Parts Switch)

Determines whether or not the Part 1 – 4 voices of the selected Multi are sounded simultaneously as

a single Part. If this parameter is set to “on,” the receive channels of the Parts 1 – 4 will automatically

be set to the same value as the Receive Ch (Basic Receive Channel) parameter in the Utility Voice

MIDI display of the Voice Mode. For details on the procedure, refer to the Quick Guide on page 40.

Settings: off, on

n If this parameter is set to “on,” the actual “Receive Ch” settings of the Part 1 – 4 will not be updated from the last

settings.

Utility Select window

(when entering from the Voice mode)

Edit window

(example: General window)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info