Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 102 von 118) (Englisch)

586891

102

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Utility

MOTIF-RACK XS Owner’s Manual

102

Basic Structure

Reference

Voice

Multi Utility

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

A. Func 1 Ctrl No.

(Assign Function 1 Control Number)

A. Func 2 Ctrl No.

(Assign Function 2 Control Number)

Determines the Control Change number generated when you use an ASSIGNABLE FUNCTION [1]/

[2] button on the MOTIF-RACK XS Editor or an external device connected to the MOTIF-RACK XS.

Settings: off, 1 – 95

BC Ctrl No.

(Breath Controller Control Number)

Determines the Control Change number generated when you use a Breath Controller on an external

device connected to the MOTIF-RACK XS.

Settings: off, 1 – 95

Arp Sw Ctrl No.

(Arpeggio Switch Control Number)

Determines the Control Number that controls on/off for Arpeggio playback.

Settings: off, 1 – 95

Arp Hold Ctrl No.

(Arpeggio Hold Control Number)

Determines the Control Number that controls on/off for the Arp Hold parameter in the Arp Edit

display (page 66).

Settings: off, 1 – 95

Arp 1 – 5 Ctrl No.

(Arpeggio 1 – 5 Control Number)

Determines the Control Number for switching among Arpeggios 1 – 5, stored to each Voice/Multi.

Settings: off, 1 – 95

Arp Assign Mode

(Arpeggio Assign Mode)

Determines the mode for switching among Arpeggios 1 – 5, stored to each Voice/ Multi.

Settings: inc, direct

inc.......................... Each time the MOTIF-RACK XS receives a message via the selected Control Change number,

Arpeggios 1 – 5 can be switched. The actual Control Change data value does not matter.

direct ..................... You can select the Arpeggio corresponding to the value of the selected Control Change number: 0 – 25

(Arpeggio 1), 26 – 50 (Arpeggio 2), 51 – 76 (Arpeggio 3), 77 – 101 (Arpeggio 4), 102 – 127 (Arpeggio 5)

3 Micro Tune (User Micro Tuning)

From this window, you can create your original Micro Tuning in the User Bank. Tuning one octave will affect the notes of all octaves from

C -2 to G8.

Number

(Micro Tuning Number)

Determines 1-4Parts” to which the created Micro Tuning setting is stored.

Settings: 1 – 8

Name

(Micro Tuning Name)

Enters the desired name for the Micro Tuning. When the cursor is located here, pressing the

[ENTER] button or the Encoder knob calls up the Naming dialog, where you can enter the desired

name. The Micro Tuning name can contain up to 20 characters. For detailed instructions on entering

characters, refer to “Voice/ Multi Name settings (Entering Characters)” in the Quick Guide (page 47).

C – B

(C Tuning Offset – B Tuning Offset)

Lets you tune the individual notes in cents to create your original Micro Tuning.

Settings: -99 cents – +0 cents – +99 cents

5 Voice MIDI

Determines the MIDI-related parameters. This window is available only when entering Utility from the Voice mode.

Receive Ch

(Basic Receive Channel)

Determines the MIDI receive channel when the MOTIF-RACK XS is set to Voice mode.

Settings: 1 – 16, omni, off

omni....................... When this is selected, all channel messages are received.

n In the Multi mode, each Part receives MIDI data according to its assigned MIDI receive channel. The receive

channel for each Part can be set in the Voice display of the Receive Ch parameter (page 94). However, when the

“Layer 1 – 4 Parts” parameter of the Utility General display (page 98) is set to “on,” the receive channels of Parts 1

– 4 in the Multi mode are automatically set to the same value as this Receive Ch (Basic Receive Channel)

parameter.

Transmit Ch

(Basic Transmit Channel)

Determines the MIDI channel over which the MOTIF-RACK XS sends MIDI data generated by

operating Knobs 1 – 5 (to an external sequencer, tone generator, or other device). This parameter is

available in the Voice mode.

Settings: 1 – 16, off

Arp MIDI Out Sw

(Arpeggio MIDI Output Switch)

Determines whether Arpeggio playback data in the Voice mode is output to the external devices as

MIDI messages. When this is set to on, the data is output.

Settings: off, on

Arp Transmit Ch

(Arpeggio Transmit Channel)

Determines the MIDI transmit channel through which Arpeggio playback data will be sent to the

external devices as MIDI messages. (When the Switch parameter above is set to on.)

Settings: 1 – 16

6 Voice mLAN

Determines various parameters of the Audio Input signal sent from the mLAN terminal in the Voice mode, such as Output jacks, Volume,

Pan, and Effect depth. Keep in mind this applies only when an optional mLAN16E2 has been installed. This window is available only when

entering Utility from the Voice mode. The parameters are the same as those in the mLAN In display in Multi Common Edit (page 91).

7 Voice MEF

Determines Master Effect parameters in the Voice mode. The settings here affect all Voices. This window is available only when entering

Utility from the Voice mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info