Bedienungsanleitung Yamaha MOTIF XF8 (Seite 18 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Setting Up

Loading the Demo data

In the default settings (when shipped from the factory),

several Demo Songs and Patterns are stored to the

instrument, starting at Song 01 and Pattern 01. However, you

may delete them by recording your original data or loading a

different Song/Pattern from an external USB storage device.

To restore the original Demo data, follow the instructions

below.

NOTICE

Loading the Demo data overwrites all the Songs or Patterns. Before

loading the Demo data, please check whether or not there is

important data in the Songs or Patterns. If there is important data in

the Songs or Patterns, save it to the external USB storage device or a

computer on the network before loading the Demo data. For

information about how to save, see page 64.

1 Press the [FILE] button and [UTILITY] button

simultaneously.

The Demo Load display appears.

2 Make sure that the Load Type is set to “all,” then

press the [ENTER] button to load the Demo data.

A display prompt appears to confirm whether or not the

destination data (Song/Pattern) should be deleted.

NOTE

If you want to load only the Demo Song data, set the Load

Type to “song.” If you want to load only the Demo Pattern

data, set the Load Type to “pattern.”

NOTICE

Loading the Demo data will overwrite all the Song/Pattern data

already created and stored, regardless of the Load Type setting.

3 Press the [INC/YES] button to execute the Demo

Load operation.

The Demo data is loaded to the Song and Pattern memory

location, then the Song Play Track View display appears.

NOTE

If you set the Load Type to “pattern” in step 2 above, the Pattern

Play display appears after loading.

Resetting the User Memory to

the Initial Factory Settings

The original factory settings of this synthesizer’s User

Memory can be restored as follows.

NOTE When connecting a computer to the MOTIF XF via a

IEEE1394 cable, disable the driver used for this

connection beforehand, and follow the procedure below to

execute Factory Set.

NOTICE

When the factory settings are restored, all the Voice,

Performance, Song, Pattern, and system settings in the Utility

mode you created will be erased. Make sure you are not

overwriting any important data. Be sure to save all important

data to your USB storage device or a computer on the network

before executing this procedure (page 64).

1 Press the [UTILITY] button then the [JOB]

button to call up the Factory Set display.

2 Set the check box of “All” to on, then press

the [ENTER] button.

The display prompts you for confirmation. Press the

[DEC/NO] button to cancel the Load operation.

3 Press the [INC/YES] button to execute the

Factory Set.

After the Factory Set has been completed, a

“Completed” message appears and operation returns

to the original display.

NOTICE

• For Factory Set operations that take longer to process, you

will see the message “Now executing Factory Set…” during

processing. While such a message is shown on the display,

never attempt to turn off the power while data is being written

to Flash ROM. Turning the power off in this state results in

loss of all user data and may cause the system to freeze (due

to corruption of data in the Flash ROM). This means that this

synthesizer may not be able to start up properly, even when

turning the power on next time.

• When entering a checkmark to the box of the Power On Auto

Factory Set and executing the Factory Set, the Factory Set

will automatically be executed each time turning the power

on. Keep in mind that this also means that your original data

in Flash ROM will be erased each time you turn on the power.

Therefore, the checkmark of this box should normally be

removed. If you remove the checkmark of this box and

execute the Factory Set, the Factory Set will not be executed

when turning the power on next time.

For details about the Factory Set, refer to “Resetting the

User Memory to the Initial Factory Settings—[JOB]

(Factory Set)” in the Reference Manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info