Bedienungsanleitung Yamaha MOTIF XF8 (Seite 19 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Moving the Cursor

Use these four buttons to navigate the display, moving the

cursor around the various selectable items and parameters

in the screen. When selected, the relevant item is highlighted

(the cursor appears as a dark block with inverse characters).

You can change the value of the item (parameter) at which

the cursor is located by using the data dial, [INC/YES] and

[DEC/NO] buttons.

Changing (editing) parameter values

Rotating the data dial to the right (clockwise) increases the

value, while rotating it to the left (counter-clockwise)

decreases it. For parameters with large value ranges, you

can increase the value by 10 by simultaneously holding

down the [INC/YES] button and pressing the [DEC/NO]

button.

To decrease by 10, do the opposite; simultaneously hold

down the [DEC/NO] button and press the [INC/YES] button.

Functions and Sub-Functions

Each mode described above contains various displays, with

various functions and parameters. To navigate your way

through these displays and select a desired function, use the

[F1] – [F6] buttons and the [SF1] – [SF5] buttons. When you

select a mode, the available displays or menus appear

directly above the buttons at the bottom of the display (as

shown below).

Depending on the currently selected mode, up to six

functions are available and can be called up with the [F1] –

[F6] buttons. Keep in mind that the available functions differ

depending on the selected mode.

Depending on the currently selected mode, up to five

functions (sub-functions) are available and can be called up

with the [SF1] – [SF5] buttons (the [SF6] button is used

mainly to call up the INFO and LIST displays). Keep in mind

that the available functions differ depending on the selected

mode. (Some displays may not have any sub-functions for

these buttons.)

The example display below is called up by pressing the [F5]

button then pressing the [SF1] button.

Inputting a number directly

For parameters having large value ranges (such as the start

and end points of a sample), you can also enter the value

directly, using the buttons below the LCD display as a

numeric keypad. When the cursor is located on such a

parameter, the [NUM] icon appears at the lower right corner

of the LCD display. When the [SF6] NUM button is pressed in

this status, each digit (1 – 9, 0) is assigned to the [SF1] –

[SF5] and [F1] – [F5] buttons as shown below, allowing you

to input a number directly by using these buttons.

Depending on the selected parameter, a negative value can

be input. When such a parameter is selected and you wish

to input a negative value, press the [F6] button (to which “-”

is assigned) then use the [SF1] – [SF5] and [F1] – [F5]

buttons.

After completing the number input, press the [ENTER] button

to actually enter the number.

Basic Operation

Decreases

number

Increases

number

Increases

number

Decreases

number

These functions can be selected

via the corresponding button

([F1] – [F6]).

These functions can be selected

via the corresponding button

([SF1] – [SF6]).

You can use these buttons

as the numeric keypad.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info