Bedienungsanleitung Yamaha MOTIF XF8 (Seite 48 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Using the Sampling feature

Sampling in the Voice/

Performance mode

When you enter the Sampling mode from the Voice mode or

Performance mode, you can create your own original

Samples, edit them, assign them to a Waveform, and then

assign the original Waveform to a User Voice. Also, in the

Performance mode, the User Voice can be assigned to a

Part of a Performance.

Sampling procedure

1 Connect a microphone or other audio equipment

to the MOTIF XF.

For information about how to do this, see page 16.

2 Enter the Voice mode or Performance mode.

When entering the Performance mode, select a Performance

to which the Sample will be assigned.

3 Press the [INTEGRATED SAMPLING] button to

enter the Sampling mode. (The indicator lights.)

The Sampling Main display appears.

4 Press the [F6] Rec button to call up the Record

Setup display, then set each parameter as follows.

Set other parameters as necessary.

5 Press the [F6] Standby button to call up the Record

Standby display.

6 Set the following parameters on the Standby

display.

6-1 Set the Trigger Mode to “level.”

6-2 Set the Trigger Level so that the red triangle of the level

meter (indicating the Trigger Level) is slightly below the

level at which the sound is input.

NOTE

The Trigger Mode parameter lets you determine how the

Sampling actually starts. When Trigger Mode is set to

“

level,

”

sampling will begin automatically as soon as the

input signal exceeds the specified Trigger Level. When

using a microphone, you should set the Trigger Level a

little higher than expected, since noise preceding the

signal may trigger the Sampling operation sooner than

intended.

7 Adjust the input sound level for optimum level by

using the GAIN knob on the rear panel.

Try to set the input level as high as possible without clipping

for the best sound quality. If you cannot adjust the input level

appropriately, change the Mic/Line setting in the Utility

mode.

8 Turn the Confirm function on or off by pressing the

[SF1] button.

This determines whether you can confirm the recorded

Sample (on) or not (off) after Sampling is finished.

When Confirm is turned on, you can easily listen back to

your just-recorded Sample and conveniently re-record it if

you are not satisfied with the results.

When Confirm is turned off, the Sampling operation will

automatically fix the Sample data and return to the Setup

display. Please note that the instrument returns to the

STANDBY display after Sampling is finished when Record

Next is turned on in the Setup display.

9 Press the [F5] Start button.

This operation enables Sampling but does not start it (a

WAITING indication appears in the display).

10 Play the sound to be sampled.

When an audio signal exceeding the specified Trigger

Level is input to the instrument, the RECORDING

indication replaces the WAITING indication and Sampling

starts.

During Sampling, a graphic representation of the

recorded audio appears in the display.

Recording Type Select “sample.”

Input Source Select “A/D Input.”

Mono/Stereo Select “stereo.”

Record Next Select “off.”

Frequency Select “44.1kHz.”

Waveform Select a Waveform having no name (shown as

the broken line in the name box below the

Waveform number). As name, “New Waveform

**” is assigned to the selected Waveform when

stored.

Keybank Select the note to which you want to assign the

sample obtained via the Sampling function.

Voice Select the Voice Bank and Number as sample

destination.

Part Select the Performance Part to which the new

Voice is assigned. This parameter is available

only when entering the Sampling mode from the

Voice mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info