Bedienungsanleitung Yamaha MOTIF XF8 (Seite 52 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Using the Sampling feature

Sampling a one-shot sound in the

Song mode

The MOTIF XF conveniently lets you sample audio material,

even while a Song is playing. This allows you to quickly and

easily “fly in” samples to your Song as you need them — for

example, capturing short sound effects from a CD, or

recording background vocal phrases with a microphone.

Sounds like these can be added to the Song as desired.

1 Connect the audio equipment to the MOTIF XF.

For information about how to do this, see page 47.

2 Press the [SONG] button to enter the Song mode,

then select the Song Number.

3 Press the [INTEGRATED SAMPLING] button to

enter the Sampling mode. (The indicator lights.)

4 Press the [F6] Rec button to call up the Record

Setup display, then set each parameter as follows.

Set other parameters as necessary.

5 Press the [F6] Standby button to call up the Record

Standby display, then make the necessary

settings.

6 Press the [F6] REC button again to enable Punch

In Waiting.

Doing this puts sample recording on standby, waiting for

song playback to reach the specified Punch-in measure.

7 Press the [R] (Play) button to start Song playback.

8 Start the audio equipment when the Song reaches

the Punch In point (when sampling actually starts).

Audio is recorded to the instrument.

9 Stop the audio equipment when the Song reaches

the Punch Out point (when sampling stops).

Press the [SF1] AUDITION button to hear the sampled

sound.

If you’re not satisfied with the results and you wish to try

again, press the [EXIT] button to return to the Sampling

Standby display and try sampling from step 4 again.

If you are satisfied with the results, press the [ENTER] button

to store the sampled sound as a “sample” and return to the

Sampling Record display.

10 Press the [SONG] button or [EXIT] button to

return to the Song Play mode.

11 Press the [R] (Play) button to play the Song.

Listen back to the Song (the sample automatically sounds

along with playback) and check that the timing is correct.

If you’re not satisfied with the timing, you can adjust it as

needed in the Song Edit mode.

12 Press the [STORE] button to store the Song.

13 Save the Waveform.

If the optional Flash Memory Expansion Memory Module is

installed to the MOTIF XF, use the Copy Job (page 53) to

save the Waveform. If not, save the Waveform to a USB

storage device (page 64).

NOTICE

The recorded (edited) Sample data will be lost when turning the

power off. Before turning off the power, you should always copy the

Sample data to the optional Flash Memory Expansion Memory

(page 53), or save the Sample data to a USB storage device (page 64).

Recording Type Select “sample+note.”

Input Source Select “A/D Input.”

Mono/Stereo Select “stereo.”

Record Next Select “off.”

Frequency Select “44.1kHz.”

Track Select the track to which the Sample Voice is

assigned.

Keybank Select the note to which you want to assign the

sample obtained via the Sampling function.

Trigger Mode Select “measure.”

Punch In/Out At Punch In, set the measure number at which

the Sampling starts automatically during Song

playback.

At Punch Out, set the measure number at which

the Sampling ends automatically during Song

playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info