Bedienungsanleitung Yamaha MOTIF XS7 (Seite 35 von 320) (Englisch)

586887

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

MOTIF XS Owner’s Manual

Step 4: Creating Your Original Song

Start Guide

Start Recording!

After completing recording setup above, press the [F] (Play) button to start recording. Press the [F] (Play) button so that its

indicator ﬂashes, then actually start recording after the count-in.

When you reach the end of the above notation, press the [J] (Stop) button to stop recording. If you’ve played any wrong

notes, press the [J] (Stop) button, then try recording again.

After recording the above melody to Track 1, set the REC TR to 2 in the Recording Setup display, then record the bass line

below to Track 2.

Correcting wrong notes

If you’ve played any wrong notes while recording and wish

to correct them, press the [EDIT] button from the Song Play

mode to go to the Song Edit mode. Song Edit lets you

clean up and edit data of already recorded Songs or insert

new data to the Songs.

Check for any mistakenly recorded or wrong events on the

Event List display of the Song Edit mode, then correct them

as needed.

1Select the recorded Song then press the [EDIT]

button to enter the Song Edit mode.

The Event List display appears.

2Select the track to be edited.

Press the Number button [1] or [2]. The list of the MIDI

events recorded in the previous section appears on the

display.

nVarious MIDI events as well as note on/off data are shown

on the display if you operate controllers such as Pitch

Bend wheel, knobs and sliders while recording.

3Use the Cursor buttons to move the cursor to

the location to be edited.

After conﬁrming the location at which the wrong data is

recorded, use the Up/Down Cursor button to move the

cursor to the location, then use the Left/Right Cursor

button to move the cursor to the data type to be

corrected. If you recorded a wrong note data at the 2nd

note of the 3rd beat (“F” on the notation), move the

cursor to the location indicated MEAS (measure) = 002,

BEAT = 03 and CLOCK = 240. Then, move the cursor to

NOTE if you wish to correct the note data and move the

cursor to GATE if you wish to correct the gate time (note

length).

nEach key has a note name; for example, the lowest

(farthest left) key on the keyboard corresponds to C1 and

the highest (farthest right) key to C6. See page 10.

nThe Song location at which you edit or input the event is

indicated by MEAS (measure), BEAT and CLOCK. A

quarter-note (one beat when the time signature is set to

“4/4”) consists of 480 divisions. The length of each note

(gate time) is indicated by Beat and Clock. For example,

001:000 is equivalent to the 4th note and 000:240 is

equivalent to 8th note.

4Turn the data dial to edit the value.

The entire line of the edited event will start ﬂashing. You

can also set the note directly from the keyboard, by

holding down the [SF6] KBD button and pressing the

desired note.

5Press the [ENTER] button to actually enter the

edited data (the entire line of the edited event

will stop ﬂashing).

Location Notes

Gate

time Velocity

Selected

track

Measure Beat Clock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info