Bedienungsanleitung Yamaha MOTIF XS7 (Seite 36 von 320) (Englisch)

586887

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Start Guide

Step 4: Creating Your Original Song

MOTIF XS Owner’s Manual

Repeat steps 3 and 5 to correct other wrong events.

6After completing editing, press the [EXIT]

button to return back to the Song Play mode.

nIf you wish to delete an unnecessary note, move the

cursor to the corresponding location, then press the [F6]

button.

nFor details about the Event List, see page 192.

Creating a swing feel—Play

Effect

The Play Effect feature lets you alter the rhythm in a variety

of musically useful ways—for example, to take something

that was recorded ‘straight’ and give it a swing feel. Let’s

change the melody you recorded above, and apply a

swing feel to it here.

1From the Song Play display, press the [F2]

button to call up the Play FX display.

2Move the cursor to the Quantize Value of Track

1, then select the 8th note icon.

3Move the cursor to the Swing Rate of Track 1,

then select “66%.”

This parameter determines the strength or amount of

swing applied. Selecting “66%” delays each of the up

beat notes to triplet values.

nIf you’ve recorded a bass part to track 2, make sure to

apply the same settings to this track as well.

After completing the settings, press the [P] (Top) button,

then press the [F] (Play) button to start the Song. You can

hear the swing feel playback.

Storing the created Song

After recording, make sure to store the created Song to

internal memory by pressing the [STORE] button to call up

the Song Store window.

When you execute the Store operation, the settings for the

destination memory will be overwritten. Important data should

always be backed up to a separate storage device.

Saving Song data to a USB

storage device

Storing different Song data to the same destination

memory, loading the Demo data, and executing the

Initialize Job overwrites and erases the previously stored

Song data. Be sure to save important data to a separate

USB storage device connected to the USB TO DEVICE

connector on the rear panel in the File mode. For details,

see page 278. When you want to load a Song to DAW

software on your computer, save the Song to a separate

USB storage device as a Standard MIDI ﬁle. For details,

see page 279.

nThe words “save” and “store” here refer to two different

operations. The “Save” operation saves the created data as a

ﬁle to an external device (in the File mode), whereas the

“Store” operation stores the data to internal memory in each

mode.

Quantize Value of

Tr a c k 1

Swing Rate of

Tr a c k 2

Applying the Play Effect setting to the actual

MIDI data

The Play Effect setting temporarily changes how the

Song data is played back, but does not actually change

the Song MIDI itself. If you want to save the Play Effect

changes as part of the Song data (for example, as a

Standard MIDI ﬁle), you can use the Job operation to

permanently apply the Play Effect settings. To execute

this Job, press the [JOB] button, the [F5] button, then

select “05: Normalize Play Effect.” For details, see

page 205.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info