Bedienungsanleitung Yamaha MOTIF XS7 (Seite 103 von 320) (Englisch)

586887

103

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Editing a Normal Voice

MOTIF XS Owner’s Manual 103

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

3Quantize Strength

Sets the “strength” by which note events are pulled toward

the nearest quantize beats. A setting of 100% produces

exact timing set via the Quantize Value parameter above. A

setting of 0% results in no quantization. A setting of 50%

results in the note events being pulled halfway between 0%

and 100%.

This parameter can be changed via the Knob directly.

Settings: 0% – 100%

4Swing*

Delays notes on even-numbered beats (backbeats) to

produce a swing feel. Settings above 1 delay the Arpeggio

notes, whereas settings below 1 advance them. A setting

of 0 produces exact timing set via the Quantize Value,

resulting in no swing. Judicious use of this setting lets you

create swing rhythms and triplet feels, such as shufﬂe and

bounce.

This parameter can be changed via the Knob directly.

Settings: -120 – +120

5Velocity Rate

Determines how much the velocity of the Arpeggio

playback is offset from the original value. For example, a

setting of 100% means the original velocities are used.

Settings below 100% will reduce the velocities of the

Arpeggio notes, whereas settings above 100% will

increase the velocities. If the resultant velocity value is less

than zero it will be set to 1, and if the resultant velocity is

greater than 128 it will be set to 127.

Settings: 0 – 200%

6Gate Time Rate

Determines how much the Gate Time (length) of the

Arpeggio notes is offset from the original value. A setting of

100% means the original gate times are used. Settings

below 100% will shorten the gate times of the Arpeggio

notes, whereas settings above 100% will lengthen them.

The Gate Time cannot be decreased beyond its normal

minimum of 1; any values outside that range will

automatically be limited to the minimum.

Settings: 0 – 200%

7Octave Range

Speciﬁes the maximum Arpeggio range in octaves.

Positive value settings increase the octave range of the

Arpeggio playback upward, whereas negative value

settings increase it downward. This parameter can be

changed via the Knob directly.

Settings: -3 – +0 – +3

8Loop

When this is set to “on,” the Arpeggio cycles while notes

are held. When this is set to “off,” the Arpeggio plays only

once even if notes are held.

Settings: off, on

9Trigger Mode

When this is set to “gate,” pressing the note starts

Arpeggio playback and releasing the note stops it. When

this is set to “toggle,” pressing the note starts/stops

Arpeggio playback and releasing the note does not affect

Arpeggio playback. Normally, this parameter should be set

to “gate.”

Settings: gate, toggle

nThe Trigger Mode “toggle” setting overcomes the Hold “on”

setting in the Arpeggio Main display (page 101). In other

words, even when the Hold parameter is set to “on,” pressing

the note start/stops Arpeggio playback when the Trigger Mode

is set to “toggle.”

)Accent Vel Threshold

(Accent Velocity Threshold)

Some Arpeggio types include special sequence data

called “Accent Phrase,” which will be played back only

when the velocities higher than a speciﬁed value are

received. This parameter determines the minimum velocity

that will trigger the Accent Phrase.

Settings: off, 1 – 127

!Accent Start Quantize

Determines the start timing of the Accent Phrase when the

Velocity speciﬁed in Accent Vel Threshold above is

received. When set to off, the Accent Phrase starts as soon

as the Velocity is received. When set to on, the Accent

Phrase starts on the beat speciﬁed for each Arpeggio type

after the Velocity is received.

Settings: off, on

@Random SFX

Some Arpeggio types feature the Random SFX function

which will trigger the special sound such as fret noise of

the guitar when the note is released. This parameter

determines whether the Random SFX is active or not.

Settings: off, on

#Random SFX Velocity Offset

Determines the offset value by which the Random SFX

notes will be shifted from their original velocities. If the

resultant velocity value is less than zero it will be set to 1,

and if the resultant velocity is greater than 128 it will be set

to 127.

Settings: -64 – +0 – +63

$Random SFX Key On Control

When this is set to “on,” the Random SFX special sound is

played with the preprogrammed velocity. When this is set

to “off,” the Random SFX special sound is played with the

velocity generated when the note is pressed.

Settings: off, on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info