Bedienungsanleitung Yamaha MOTIF XS7 (Seite 112 von 320) (Englisch)

586887

112

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Editing a Normal Voice

MOTIF XS Owner’s Manual

112

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Element Edit parameters

[VOICE] ➞ Normal Voice selection ➞ [EDIT] ➞ [1] – [8]

If you wish to edit the sounds that make up a Voice and the basic parameters that determine the sound, such as Oscillator,

Pitch, Filter, Amplitude, and EG (Envelope Generator), call up the Element Edit display.

About the asterisk (*) marks

For users who are new to Voice editing and may be confused by the large amount of parameters, the most basic and easy-to-understand

parameters are conveniently marked with asterisks in this section. If you are just starting out with Voice editing, try these parameters ﬁrst.

Selected Element display/

Four-Element display

In the Element Edit mode, you can use two types of display.

One type of display lets you edit parameters for the

currently selected Element and the other type of display

lets you view parameters for four Elements. You can switch

between these two types by pressing the [SF5] button.

When the display for four Elements is shown, you can

switch between the displays for Elements 1 – 4 and 5 – 8

by using the left and right cursor buttons.

Setting the Waveform and Note range

of the Element—[F1] Oscillator

nDepending on the selected parameter, the LIST icon is shown

at the tab menu corresponding to the [SF6] button. In this

condition, you can call up the list by pressing the [SF6] LIST

button, then select the desired item from the list. For details,

see page 82.

1Element Switch*

Determines whether the currently selected Element is on or

off. When this is set to off, the currently edited Element will

not sound.

Settings: off (inactive), on (active)

2XA Control (Expanded Articulation Control)

Expanded Articulation (XA) is a special feature of the

MOTIF XS that provides greater performance ﬂexibility and

realism (see box on next page). This parameter determines

how the XA feature of the Element works. Try setting this

parameter referring to the four types of the XA Mode

described below. You can realize the desired sound

depending on your performance articulation by assigning

the same Element Group to the Elements having the same

type of the XA mode.

Settings: normal, legato, key off sound, wave cycle, wave random, all

AF off, AF 1 on, AF 2 on

normal

When this is selected, the Element will sound normally each time you

press the note.

legato

When this is selected and the Mono mode is selected, an alternate

Element (different from the one used when XA mode is set to “normal”)

will be played when you play the keyboard in legato fashion (playing

the next note of a single-note line or melody before releasing the

previous note).

SF5

The display indicating the settings of

the current Element

The display indicating the settings of

four Elements

This icon indicates that you can call up

the display for another four Elements.

)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info