Bedienungsanleitung Yamaha MOTIF XS7 (Seite 149 von 320) (Englisch)

586887

149

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Editing a Performance

MOTIF XS Owner’s Manual 149

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

nDepending on the selected parameter, the LIST icon is shown

at the tab menu corresponding to the [SF6] button. In this

condition, you can call up the list by pressing the [SF6] LIST

button, then select the desired item from the list. For details

see page 82.

1Category

2Type

From the Category column, you can select one of the Effect

Categories each of which contains similar Effect types.

From the Type column, you can select one of the Effect

Types listed in the selected Category.

Settings: Details about the Effect categories and types are described

on page 70.

3Preset

You can set various parameters in order to change how the

sound is affected by the selected Effect type. This

parameter lets you call up the pre-programmed settings of

these effect parameters.

4Effect Parameters

The number of parameters and values available differs

depending on the currently selected effect type. Refer to

page 73 for details about the Effect parameters. Refer to

the separate Data List booklet for information on the

parameters for each Effect type.

Effect settings—[F5] Effect

From the following displays, you can set the Effect

connection and values of other parameters. For details

about the structure in the Performance mode, see page 69.

This display gives you at-a-glance, overall view of the

effect routing and comprehensive control over the effects.

nDepending on the selected parameter, the LIST icon is shown

at the tab menu corresponding to the [SF6] button. In this

condition, you can call up the list by pressing the [SF6] LIST

button, then select the desired item from the list. For details

see page 82.

1Chorus (Chorus Category/Type)

Selects a Chorus Effect type after selecting a category.

From the Category column, you can select one of the Effect

categories, each of which contains similar Effect types.

From the Type column, you can select one of the Effect

types listed in the selected category.

Settings: Details about the Effect categories and types are described

on page 70.

2Reverb (Reverb Type)

Determines the Reverb Effect type. It is not necessary to

select a Category because there is only one category in

Reverb.

Settings: Details about the Effect types are described on page 70.

3CHORUS TO REVERB

Determines the Send level of the signal sent from the

Chorus Effect to the Reverb Effect. The higher the value,

the deeper the Reverb that is applied to the Chorus-

processed signal.

Settings: 0 – 127

4Chorus Return

Determines the Return level of the Chorus Effect.

Settings: 0 – 127

5Chorus Pan

Determines the pan position of the Chorus effect sound.

Settings: L63 (far left) – C (center) – R63 (far right)

Effect Parameter settings—[SF3] Ins A,

[SF4] Ins B

Effect Connection settings—[SF1] Connect

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info