Bedienungsanleitung Yamaha MOTIF XS7 (Seite 246 von 320) (Englisch)

586887

246

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Audio Recording to Song/Pattern (Sampling mode)

MOTIF XS Owner’s Manual

246

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

8Key

Indicates the Key Bank (page 244) set in the Sampling

Record Setup display. The Key Bank can be changed both

here and in Sampling Edit (page 250) after the Recording

is ﬁnished.

Settings: C -2 – G8

nYou can also set the Key directly from the keyboard, by

holding down the [SF6] KBD button and pressing the desired

key. For details, see page 82.

9Trigger Level

When the Trigger Mode ()) is set to “level,” you’ll also

need to set the Trigger Level. Sampling (Recording) will

begin as soon as an input signal exceeding the speciﬁed

trigger level is received. The level set here will be indicated

as a red triangle in the level meter. For best results, set this

as low as possible to capture the entire signal, but not so

low as to record unwanted noise.

Settings: 000 – 127

)Trigger Mode

Determines the method by which Sampling will be

triggered.

Settings: level, meas, manual

level

Sampling starts as soon as an input signal exceeding the speciﬁed

trigger level (9) is received.

meas (measure)

This should be set together with the Punch In/Out measure (!). After

the [F6] Start button is pressed, actual sampling will begin at the

speciﬁed Punch In measure, and end at the speciﬁed Punch Out

measure. Sampling will also stop when the Song/Pattern is stopped by

pressing the [J] (Stop) button. This method lets you recording the

audio signal while monitoring the sound of other Tracks.

manual

Sampling starts soon after you press the [F6] REC button. This setting

lets you start Sampling at the desired timing regardless of the input

level from audio source.

!Punch In/Out

This parameter is available only when the Trigger Mode

()) is set to “meas.” The Punch In value determines the

measure number at which sampling starts automatically

while the Punch Out value determines the measure number

at which sampling stops automatically.

Settings: 001 – 999 (Song mode), 001 – 256 (Pattern mode)

@Level Meter

#Recordable Time (Indication only)

Refer to the description of the same-named parameter on

page 165.

$[SF1] Conﬁrm

This is available when Recording Type in the Setup display

(page 244) is set to “sample” or “sample+note.”

%[F5] Start

Press this button to start Sampling.

During Sampling, a graphic representation of the recorded

audio appears in the display.

[F6] Stop

Press this button to stop Sampling (Recording).

In each of the following cases, the “FINISHED” display

appears after Sampling is ﬁnished.

• When Recording Type (page 244) is set to “sample” or

“sample+note” and [SF1] Conﬁrm is turned on

• When Recording Type (

page 244

) to “slice+seq”

From the FINISHED display, you can listen to the just-

recorded Sample by pressing the [SF1] button. See below

for details.

When [F2] Conﬁrm is turned on before the Sampling starts,

the FINISHED display below appears as soon as the

Sampling is ﬁnished. From this display, you can hear and

conﬁrm the Sample by pressing the [SF1] Audition button.

If you are satisﬁed with the sound, press the [ENTER]

button to ﬁx the Sampling result as Sample data. If you are

not satisﬁed with the Sampling result, press the [EXIT]

button then try again.

When [F2] Conﬁrm is turned off before Sampling starts, the

Sampling operation will automatically ﬁx the Sample data

and return to the Setup display (page 244).

[SF1] Audition

You can hear the recorded Sample by holding this button.

This lets you hear precisely how the Sample is played back.

Sampling RECORDING display

Sampling FINISHED display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 246

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info