Bedienungsanleitung Yamaha MOTIF XS7 (Seite 247 von 320) (Englisch)

586887

247

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Audio Recording to Song/Pattern (Sampling mode)

MOTIF XS Owner’s Manual 247

nWhen Recording Type (

page 244

) is set to “sample” or

“sample+note” and [SF1] Conﬁrm is turned off, stopping

Recording will automatically ﬁx the just-recorded Sample data

and the instrument will return to the Setup display (page 244).

Please note that the instrument returns to the STANDBY

display as soon as Sampling is ﬁnished if Record Next is

turned on in the Setup display before the Sampling operation.

nWhen Recording Type (

page 244

) is set to “slice+seq,”

stopping Recording calls up the Record Trim display

(page 247).

Trimming the Sample—Record Trim

display

When Recording Type (page 244) is set to “slice+seq,”

stopping Recording (and subsequently ﬁxing the sampled

data when Conﬁrm is turned on) calls up this display. From

this display, you can delete unwanted portions of the

Sample, located ahead of the Start point and located after

the End point). Press the [EXIT] button to go back to the

Setup display.

The procedure in the Record Trim display is as follows.

1Set the Start Point to the point at which the

actual sound of the recorded Sample starts.

You can use the [SF1] Audition button to listen to the

Sample and [SF4] Zoom Out/[SF5] Zoom In button to

view the wave of the Sample.

nBy pressing the [SF6] NUM button, you can use the [SF1]

– [SF5] and [F1] – [F6] buttons as number buttons.

Pressing the [EXIT] button return their buttons to the

original status. For details, see page 81.

2Set the Tempo (9), Meter ()), and Measure (!)

for Sample playback.

The End Point (8) will be automatically changed so

that the length between the Start Point and the End

Point matches the settings here.

3Set the Loop Point (7) as necessary.

When the menu indication of the [SF2] button is

“LP=ST,” the Start (Start Point) and the Loop (Loop Start

Point) will share the same address, meaning that both

of them will be changed simultaneously, even if just one

of them is changed. Pressing the [SF2] button in this

condition changes the menu from “LP=ST” to “LP≠ST.”

When the menu indication here is “LP≠ST,” the Start

(Start Point) and the Loop (Loop Start Point) can be

changed independently. When pressing the [SF2]

button in this condition, the address value of the Start

will be copied to the one of the Loop, with the result that

both of them share the same address value. The menu

indication of the [SF2] button also changes from

“LP≠ST” to “LP=ST.”

4Press the [ENTER] button. (The display

prompts you for conﬁrmation.)

If you wish to cancel the operation, press the [DEC/NO]

button.

5Press the [INC/YES] button to execute the

Extract operation to delete unwanted portions

of the Sample.

6Press the [F6] Slice button to call up the Slice

display.

The data deleted via the Extract operation cannot be

recovered. If you have accidentally deleted a necessary

portion of the Sample, press the [EXIT] button to return to the

Setup display, then execute the Sampling operation again.

Parameters 1 – 5 are the same as the ones in the

Standby display (page 245).

6Start Point

Determines the Start point for Sample playback. The part

at the left side of this point will not be played back.

Settings: 0000000 – End point

7Loop Point

Determines the Loop point at which the loop playback starts.

When the Play mode is set to “loop,” the Sample is played

back between this Loop point and the End point (

Settings: 0000000 – End point

8End Point

Determines the End point for Sample playback. The part at

the right side of this point will not be played back. The End

Point will be automatically determined so that the length

between the Start Point and the End Point matches the

settings of the Tempo (

), Meter (

(

), and Measure (

Settings: 0000000 – (depending on the Sample’s length)

9Tempo

Determines the Tempo of Sample playback. Setting the

Tempo changes the End Point (8) so that the length

between the Start Point and the End Point matches the

settings of the Meter and Measure.

Settings: 5.0 – 300.0

CAUTION

)

(

# %$ ^ & *

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 247

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info