Bedienungsanleitung Yamaha MOTIF XS7 (Seite 268 von 320) (Englisch)

586887

268

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual

268

2Keyboard Transmit Ch

Determines the MIDI channel over which the instrument

sends MIDI data (to an external sequencer, tone generator,

or other device). This parameter is available in the single-

timbre tone generator mode (Voice/Performance modes).

Settings: 1 – 16, off

nIn the Song/Pattern mode, the MIDI data created by playing

the keyboard/knobs/wheels is sent to the tone generator block

or the external MIDI devices via the MIDI output channel of the

currently selected track. The Output Channels of each track

can be set in the Output Channel display (page 184) of the

Song Play mode.

3Device Number

Determines the device number used by this synthesizer in

receiving or transmitting data. This number must match the

Device Number of the external MIDI device when

transmitting/receiving bulk data, parameter changes or

other system exclusive messages.

Settings: 1 – 16, all, off

all

When this is selected, system exclusive messages for all MIDI device

numbers are received. When system exclusive messages such as bulk

dump are transmitted from the MOTIF XS with this setting, the MOTIF

XS is recognized as Device Number 1.

off

When this is selected, system exclusive messages such as bulk dump

and parameter change cannot be transmitted or received. When you

try execute transmission or reception of system exclusive messages,

an error message appears.

4MIDI In/Out

Determines which physical output/input terminal(s) will be

used for transmitting/receiving MIDI data.

Settings: MIDI, USB, mLAN (when the optional mLAN16E2 has been

installed to the MOTIF XS6/7)

nThe three terminal types above cannot be used at the same

time. Only one of them can be used to transmit/receive MIDI

data.

5MIDI Sync

Determines whether Song/Pattern/Arpeggio playback will

be synchronized to the instrument’s internal clock or an

external MIDI clock.

Settings: Internal, MIDI, auto, MTC

internal

Synchronization to internal clock. Use this setting when this synthesizer

is to be used alone or as the master clock source for other equipment.

MIDI

MIDI Synchronization to a MIDI clock received from an external MIDI

instrument via MIDI.

auto

When MIDI clock is transmitted continuously from an external MIDI

device or computer, the internal clock of the MOTIF XS is not effective

and the MOTIF XS is synchronized with the external clock. When MIDI

clock is not transmitted from the external MIDI device or computer, the

internal clock of the MOTIF XS continues to run in sync with the latest

received tempo of the external MIDI device or computer (DAW

software). Note that the tempo cannot be changed on the MOTIF XS

when this value is selected. This setting is useful when you wish to

alternate between external clock and internal clock.

MTC (MIDI Time Code)

Synchronization to an MTC signal received via MIDI. MMC signals are

transmitted via MIDI. Use this setting when this synthesizer is to be

used as a MIDI slave, such as when synchronized to an MTC-capable

MTR. The MTC Sync function is available only in the Song mode.

nWhen this parameter is set to “MIDI,” make sure that the

external MIDI instrument connected to the MOTIF XS will

transmit the MIDI clock to the MOTIF XS.

nWhen MIDI Sync is set to “MTC,” Songs and Arpeggios cannot

play back in the Song mode but Patterns and Arpeggios can

play back in the Pattern mode.

nMTC (MIDI Time Code) allows simultaneous synchronization of

multiple audio devices via standard MIDI cables. It includes

data corresponding to hours, minutes, seconds, and frames.

The MOTIF XS does not transmit MTC.

MMC (MIDI Machine Control) allows remote control of

multitrack recorders, MIDI sequencers, etc. An MMC-

compatible multitrack recorder, for example, will automatically

respond to start, stop, fast forward, and fast reverse operations

performed on the controlling sequencer, thus keeping

playback of the sequencer and multitrack recorder aligned.

6Clock Out

Determines whether MIDI clock (F8H) messages will be

transmitted via MIDI.

Settings: on, off

7Sequencer Control

Determines whether Sequencer Control signals—start

(FAH), continue (FBH), stop (FCH), and song position

pointer (F2H)—will be received and/or transmitted via the

MIDI OUT/USB terminal.

Settings: off, in, out, in/out

off

Not transmitted/recognized.

Recognized but not transmitted.

out

Transmitted but not recognized.

in/out

Transmitted/recognized.

8MTC Start Offset (MIDI Time Code Start Offset)

Determines the speciﬁc time code point from which

sequence playback starts, when MTC is received. This

feature can be used to accurately align playback of this

synthesizer with an external MTC-compatible device.

Settings: Hour: Minute: Second: Frame

Hour: 00 – 23

Minute: 00 – 59

Second: 00 – 59

Frame: 00 – 29

9Bank Select

This switch enables or disables Bank Select messages,

both in transmission and reception. When this is set to “on,”

this synthesizer responds to incoming Bank Select

messages, and it also transmits appropriate Bank Select

messages (when using the panel). When this is set to “off,”

Bank Select messages cannot be transmitted/received.

Settings: off, on

)Program Change

This switch enables or disables Program Change

messages, both in transmission and reception. When this

is set to “on,” this synthesizer responds to incoming

Program Change messages, and it also transmits

appropriate Program Change messages (when using the

Yamaha MOTIF XS7 Seite 268

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info