Bedienungsanleitung Yamaha MOTIF XS7 (Seite 269 von 320) (Englisch)

586887

269

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual 269

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

panel). When this is set to “off,” Program Change

messages cannot be transmitted/received.

Settings: off, on

!Local Control

This determines whether or not the tone generator of the

instrument responds to your keyboard playing. Normally,

this should be set to “on”—since you’ll want to hear the

sound of the MOTIF XS as you play it. Even if this is set to

“off,” the data will be transmitted via MIDI. Also, the internal

tone generator block will respond to messages received

via MIDI.

Settings: off, on

@Receive Bulk

Determines whether or not Bulk Dump data can be

received.

Settings: protect (not received), on (received)

#Controller Reset

Determines the status of the controllers (Modulation Wheel,

Aftertouch, Foot Controller, Breath Controller, Knobs, etc.)

when switching between voices. When this is set to “hold,”

the controllers are kept at the current setting. When this is

set to “reset,” the controllers are reset to the default states

(below).

Settings: hold, reset

If you select “reset,” the controllers will be reset to the following states/

positions:

$Bulk Dump Interval

Determines the interval time of the Bulk Dump transmission

when the Bulk Dump function is used, the Bulk Request is

received, or system exclusive messages recorded to a

sequence track are played back. The Bulk Dump function

lets you save the data in the Edit buffer (DRAM) or Flash

ROM and transmit as Bulk data (system exclusive

message) to an external MIDI instrument or sequence

software on a computer. This data can then be sent back to

the instrument, restoring all the settings you archived.

Settings: 0 – 900 ms

nWhen the Bulk Dump function is used or the Bulk Request is

received, the maximum value of the interval time is ﬁxed to

30ms, meaning that the Bulk transmission is executed at an

interval time of 30ms, even if this parameter is set to a value

above 31ms. When system exclusive messages recorded to a

track of a Song or Pattern are played back, value settings

above 31ms will be available, meaning that the Bulk

transmission is executed with the interval time as set here,

regardless of the tempo setting of the Song or Pattern.

Resetting the User Memory to the Initial

Factory Settings—[JOB] (Factory Set)

In the Utility Job mode, you can restore this synthesizer’s

User memory (page 79) to the factory default settings

(Factory Set). Please note that the setting of the Power On

Auto Factory Set on this display will be stored automatically

by executing the Factory Set.

When the factory settings are restored, all the Voice, Performance,

Song, Pattern, and system settings in the Utility mode you created

will be erased. Make sure you are not overwriting any important

data. Be sure to save all important data to a USB storage device or

to a computer connected to the same network as the MOTIF XS

(page 278) before executing this procedure.

1Power On Auto Factory Set

When this parameter is set to “on,” turning the power on

will restore the User memory to the factory default settings

and load the demo songs and demo patterns. Normally,

this should be set to “off.”

Settings: on, off

When the Power On Auto Factory Set parameter is set to “on,”

turning the power off erases all the User memory data such as

Voice, Performance, Song, Pattern and Utility settings.

For instructions on executing the Factory Set Job, see

page 22.

Sequencer Settings—[SEQ SETUP]

In the Song mode, Pattern mode or Performance mode,

pressing the [SEQ SETUP] button calls up the display for

setting the overall sequencer parameters. After setting

these, press the [STORE] button to store the settings of

both the Sequencer Setup parameters and the Utility

parameters.

All Sequencer Setup settings will be lost if the power is turned off

without storing.

nIn the Voice mode and Master mode with the Mode parameter

(page 254) set to “Voice,” the [SEQ SETUP] button cannot be

used.

Pitch Bend Center

Modulation WHeel Minimum

Aftertouch Minimum

Foot Controller Maximum

Footswitch Off

Ribbon Controller Center

Breath Controller Maximum

Assignable Function Off

Expression Maximum

Sustain Off

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 269

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info